Question OpenRGB | Can't get my RGB working again. Will I need to reinstall windows? Will that even work?

[cchamiltonn]

Hi Guys,

I have just built a brand new machine and the RGB was working all fine. I downloaded some software called Open RGB in order to control all the lighting. The software asked to re-size zones and I entered '3' for the size of each one thinking it meant the number of fans (I had no idea what I was doing) see below:

Since I made this change only one fan from each group is lit and it is only lit on one end.

I have 9 Lian Li SL120 RGB and they are in groups of 3 connected to one another and plugged into a Uni Hub. I have no idea what I have done but any help would be much appreciated

 

[faalin]

why didnt you download the L-connect software from Lain Li? The board looks like it has the required 3pin 5v ARGB header to synchronise with the UNI hub and software

 

[cchamiltonn]

why didnt you download the L-connect software from Lain Li? The board looks like it has the required 3pin 5v ARGB header to synchronise with the UNI hub and software

Hi, I have since removed ORGB and restarted (had to remove kettle lead for a mo) and it has now come back and I have no used L-Connect. I was not aware of a ARGB header I will take a look at this tonight and get it plugged in. I have an x570 elite rev 1 board. I have plugged the hub into a usb header which seems to let me control the lighting should it be in D_LED1 or LED_C1?

I am a little confused