Hey guys,
Here is detailed explanation on my problem.
My os and bios responds properly but the screen goes black.
I did not have this problem this morning. I shut the pc down and went to work and when i tried to start it again this problem started. By the way pc was off or at least 10 hours.
Please note that, after pressing the power button, windows bootup logo shows then the screen goes black. Also, after booting up if i press sleep mode and then press wake up on my key board the screen shows the log in screen for about 3 seconds and the screen goes black.
Troubleshooting process I have tried in order:
Processor : core 2 duo E4500
Motherboard: Esonic G41CPL3
Chipset: IntelG41 + ICH7
Drives: 128gb ssd + 500gb seagate hdd
Graphics: nvidia GT 710 2gb
Ram: 2x 4gb pc3
Os: win 10
I changed the bios battery recently.
Pc is mostly used for video editing.
Here is detailed explanation on my problem.
My os and bios responds properly but the screen goes black.
I did not have this problem this morning. I shut the pc down and went to work and when i tried to start it again this problem started. By the way pc was off or at least 10 hours.
Please note that, after pressing the power button, windows bootup logo shows then the screen goes black. Also, after booting up if i press sleep mode and then press wake up on my key board the screen shows the log in screen for about 3 seconds and the screen goes black.
Troubleshooting process I have tried in order:
- shutting the pc down then restarting again.
- I have 2x 4gb ddr3 ram so, I took them out and tried putting it back 1 by one on each slot.
- Took my grapgics card out and tried it in another pc, works fine.
- I have reset the bios.
Processor : core 2 duo E4500
Motherboard: Esonic G41CPL3
Chipset: IntelG41 + ICH7
Drives: 128gb ssd + 500gb seagate hdd
Graphics: nvidia GT 710 2gb
Ram: 2x 4gb pc3
Os: win 10
I changed the bios battery recently.
Pc is mostly used for video editing.
Facebook
Twitter
Instagram