P4S533 and IDE failure

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Hi , thanks for looking , i had to swap out a faulty 1.8a cpu with intel
,and i now have its replacement
but for some reason i cant get the secondary ide channel to be recognised
anymore. i have tried all available bios's 1007-1011beta for the P4S533 ,and
set all defaults in the bios,set to auto /set to manual etc.... that didnt
help , tried replacing the cable (got a new one even too) if i plug the
CD/DVD into primary ide they are seen ok in bios etc. could the channel just
"die" ?

anyone seen this before , know any fixes or have another bright idea to try
?

thanks
Mick

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

Yes, the secondary IDE controller may have failed.

--
DaveW



"Kbird" <mickh2@telus.net> wrote in message news:JDtRd.4$9a3.0@edtnps91...
> Hi , thanks for looking , i had to swap out a faulty 1.8a cpu with
> intel
> ,and i now have its replacement
> but for some reason i cant get the secondary ide channel to be recognised
> anymore. i have tried all available bios's 1007-1011beta for the P4S533
> ,and
> set all defaults in the bios,set to auto /set to manual etc.... that didnt
> help , tried replacing the cable (got a new one even too) if i plug the
> CD/DVD into primary ide they are seen ok in bios etc. could the channel
> just
> "die" ?
>
> anyone seen this before , know any fixes or have another bright idea to
> try
> ?
>
> thanks
> Mick
>
>

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.asus (More info?)

This happened on my son's P4S333. After a while, it was acting so flakey
that I RMA'd it. They replaced the south bridge chip and it's been
working fine since.
-6

"Kbird" <mickh2@telus.net> wrote in news:JDtRd.4$9a3.0@edtnps91:

> Hi , thanks for looking , i had to swap out a faulty 1.8a cpu with
> intel ,and i now have its replacement
> but for some reason i cant get the secondary ide channel to be
> recognised anymore. i have tried all available bios's 1007-1011beta
> for the P4S533 ,and set all defaults in the bios,set to auto /set to
> manual etc.... that didnt help , tried replacing the cable (got a new
> one even too) if i plug the CD/DVD into primary ide they are seen ok
> in bios etc. could the channel just "die" ?
>
> anyone seen this before , know any fixes or have another bright idea
> to try ?
>
> thanks
> Mick
>
>
>