Hi,
Hope you are good and healthy.
So I'm building (old) PC with specs below:
Motherboard: Gigabyte Z68A D3 H3 - Rev 1.0 - BIOS F11
CPU: Intel i5 - 2500k (no OC)
VGA: Ati HD 5750 512mb 256bit
RAM: DDR3 - Samsung (1x4) - 10600
PSU: Imperion 600w
HDD: SSD V-Gen 120gb
So when all put together, I want to monitor the cpu with cpu-z (?) but suddenly the PC shut down and won't boot up. I took out the CMOS battery and wait for hours to put it back and never try that program again. The PC is installed with basic program (anti virus, office, games) and the first problem occur after a week usage.
When I play around 2-3 hours, the PC freeze and then won't boot up (same when I tried the cpu-z) I tried to press the power button and then the led on and off in a second. Same as above, I had to take out the motherboard battery and wait for hours to put it back and power on (and the problem happen again)
I tried to run monitor program (hw-monitor) and suddenly the PC shut down and won't boot up again (like the problem I mentioned above) had to take out the battery again and wait.
Things that I tried so far but no luck:
Thank you and stay healthy.
Ryan
Hope you are good and healthy.
So I'm building (old) PC with specs below:
Motherboard: Gigabyte Z68A D3 H3 - Rev 1.0 - BIOS F11
CPU: Intel i5 - 2500k (no OC)
VGA: Ati HD 5750 512mb 256bit
RAM: DDR3 - Samsung (1x4) - 10600
PSU: Imperion 600w
HDD: SSD V-Gen 120gb
So when all put together, I want to monitor the cpu with cpu-z (?) but suddenly the PC shut down and won't boot up. I took out the CMOS battery and wait for hours to put it back and never try that program again. The PC is installed with basic program (anti virus, office, games) and the first problem occur after a week usage.
When I play around 2-3 hours, the PC freeze and then won't boot up (same when I tried the cpu-z) I tried to press the power button and then the led on and off in a second. Same as above, I had to take out the motherboard battery and wait for hours to put it back and power on (and the problem happen again)
I tried to run monitor program (hw-monitor) and suddenly the PC shut down and won't boot up again (like the problem I mentioned above) had to take out the battery again and wait.
Things that I tried so far but no luck:
- Flash the BIOS with old one (the version when I bought the motherboard)
- Change the RAM slot (1,2,3,4)
- Change the HDD
- Put new thermal paste
Thank you and stay healthy.
Ryan