I recently got an AIO cooler which came to replace my ryzen cooler, after this my PC wouldn’t give a monitor signal, later the CPU and motherboard became faulty so I bought a new pair.
With this new CPU and motherboard I was hopeful that this issue would pretty much alleviate itself but no I still have 0 signal being output to the monitor. I already tested two GPU’s and confirmed it was functional. I tested the videos cables and they were also functional. All that appears now is a red light over the CPU label on my new motherboard and I’m clueless on what the issue could be since all of it is new, plus this was a persistent issue on my last CPU and motherboard.
I’m really desperate and tried many different solutions:
Just waiting for anything to pop up on my monitors, but nothing.
Specs:
Board: B550 Tomahawk Max Wifi
GPU: TUF Gaming RTX 3070
CPU: Ryzen 7 5800x
RAM: 16 GB Corsair Vengeance
PSU: EVGA G3 750w
If you read all of this thank you.
With this new CPU and motherboard I was hopeful that this issue would pretty much alleviate itself but no I still have 0 signal being output to the monitor. I already tested two GPU’s and confirmed it was functional. I tested the videos cables and they were also functional. All that appears now is a red light over the CPU label on my new motherboard and I’m clueless on what the issue could be since all of it is new, plus this was a persistent issue on my last CPU and motherboard.
I’m really desperate and tried many different solutions:
- Checking the cables connecting from the PC to the monitor, they work.
- Switching out graphic cards, nothing changed
- Re-seating RAM in different DIMM ports, nothing
- Trying only one stick of RAM, nothing
- Cleaning the RAM sticks, nothing
- Resetting CMOS battery, nothing
- Putting back my old Wraith cooler, nothing.
Just waiting for anything to pop up on my monitors, but nothing.
Specs:
Board: B550 Tomahawk Max Wifi
GPU: TUF Gaming RTX 3070
CPU: Ryzen 7 5800x
RAM: 16 GB Corsair Vengeance
PSU: EVGA G3 750w
If you read all of this thank you.