Question Pc keeps crashing after upgrades.

[Yarrnn]

I7 11700K
2080 asus
NZXT Z490
Corsair vengeance 32GB 3600mhz

After upgrading my new motherboard I keep on crashing after turning on XMP.
I'm on my third set of ram sticks. Ive had contact with several sellers and NZXT itself for asking what ram i should use so i can enable XMP. Now i installed the new set of recomended ram and it still crashes. It goes in to a boot loob and after that it puts the ram at 2133 mhz. anyone tips how i can enable or even put my ram at 3200 mhz?

 

[dudio]

It's not clear what your previous motherboard was, and if you have done a full clean reinstall of Windows (a different motherboard requires a fresh install). It's not clear if it's the bios or Windows causing you the grief.
Also, what PSU do you have?

 

[Bob.B]

I7 11700K
2080 asus
NZXT Z490
Corsair vengeance 32GB 3600mhz

After upgrading my new motherboard I keep on crashing after turning on XMP.
I'm on my third set of ram sticks. Ive had contact with several sellers and NZXT itself for asking what ram i should use so i can enable XMP. Now i installed the new set of recomended ram and it still crashes. It goes in to a boot loob and after that it puts the ram at 2133 mhz. anyone tips how i can enable or even put my ram at 3200 mhz?

Post a link to the set of ram sticks.

Use just one stick of ram in the proper slot.
Enable xmp.
Does the pc boot and not crash?

 

[Bob.B]

Post a link to the set of ram sticks.

Use just one stick of ram in the proper slot.
Enable xmp.
Does the pc boot and not crash?