I just upgraded my cpu from r3 3200g to r5 5600 on a A320m motherboard. I have 2x 8gb ddr4 3200mhz memory (Kingston fury)
On default bios setting (3200)
Dual channel the pc starts but no input
Single stick i'm able to get into windows and ram test runs fine(ran it for 3 mins then stop it, idk it could run for longer or not, but it doesn't shut down)
With manual Underclock, the PC runs fine
But when i try Prime 95 "memory controller & ram" torture test
I set to 2800 dual channel, it runs 20sec then shutdown
2666 runs for 30sec
2400 runs for a minute
2133 runs for 3 minute
Here's the full spec :
mobo : Asrock a320m-hdv r4.0
CPU : Ryzen 5 5600
RAM : 2x 8gb Kingston Hyperx fury 3200mhz
GPU : Rx 560xt /rx 470d ( it only used 75w)
PSU : MSI a650bn
1 sata ssd (128gb) & 1 nvme ssd (500gb)
1 harddisk
I ran other torture/stress tests like the cpu and gpu it doesn't cause shutdowns
On default bios setting (3200)
Dual channel the pc starts but no input
Single stick i'm able to get into windows and ram test runs fine(ran it for 3 mins then stop it, idk it could run for longer or not, but it doesn't shut down)
With manual Underclock, the PC runs fine
But when i try Prime 95 "memory controller & ram" torture test
I set to 2800 dual channel, it runs 20sec then shutdown
2666 runs for 30sec
2400 runs for a minute
2133 runs for 3 minute
Here's the full spec :
mobo : Asrock a320m-hdv r4.0
CPU : Ryzen 5 5600
RAM : 2x 8gb Kingston Hyperx fury 3200mhz
GPU : Rx 560xt /rx 470d ( it only used 75w)
PSU : MSI a650bn
1 sata ssd (128gb) & 1 nvme ssd (500gb)
1 harddisk
I ran other torture/stress tests like the cpu and gpu it doesn't cause shutdowns
Last edited: