Question pc turns on but no display. red vga light

[zerohours]

for a while now when i first turn on my pc for the day it turns on and the fans spin aswell as the lights turn on but i get no display on my monitor.
the ez debug cpu light turns red first then after 2 seconds it turns off but the vga light is now red.
I would usually get around this by turning the pc off and on for maybe 5 minutes (dont judge) and then it would boot and take me to the windows login screen and everything would work normally after that.
I have tried reseating all the gpu cables, display port cables, and even used my gpu without the vertical mount installed and the gpu connected directly to the motherboard. Another part i tried is I am also using Lian Li gpu extension cables but even without them i still had the light. Can anyone help me find the problem?
these are my pc parts: https://pcpartpicker.com/list/ddXcZw

 

[Lutfij]

Welcome to the forums, newcomer!

I would usually get around this by turning the pc off and on for maybe 5 minutes (dont judge) and then it would boot and take me to the windows login screen and everything would work normally after that.
This would indicate an underlying issue. Try and flash the BIOS with the latest BIOS version using this guide;

View: https://youtu.be/eNi0Y0CFDEI

then clear the CMOS and see if the issue is alleviated.

I have tried reseating all the gpu cables, display port cables, and even used my gpu without the vertical mount installed and the gpu connected directly to the motherboard.
Have you tried placing the GPU in the lowest most PCIe slot?

If that fails, source(borrow, not buy) a reliably built 850W PSU to power your entire system as is ad see if you get display.

Just curious, among the 2 kits of Corsair ram, are they both the same PCB version?