[SOLVED] pc turns on but no display the monitor says it has no signal

[FriendlyBTW]

There ar NO beeps and ive tried to Replace the GPU But it still didn't work all the fans work and the psu in a 750w Psu, GTX 560ti, i5 2320 with 8 gb of ddr3

 

[korv]

Maybe because of the cable (displayport or hdmi)?

 

[FriendlyBTW]

it uses a vga cable from the Gpu to the monitor but I can try and use a HDMI to a tv

 

[korv]

it uses a vga cable from the Gpu to the monitor but I can try and use a HDMI to a tv

Right, use a hdmi cable and try again.

 

[FriendlyBTW]

I tried with a HDMI still saying no input / :

 

[korv]

I tried with a HDMI still saying no input / :

oof. Can you make sure your pc actually works by connecting it to a tv?

 

[FriendlyBTW]

I think the issue lies in some component in the pc as the fans and power appers to turn on with no warning beeps but there is no output from the pc

 

[Shay Green]

I think the issue lies in some component in the pc as the fans and power appers to turn on with no warning beeps but there is no output from the pc

Make sure your power connections like the 24pin and cpu are correctly pushed in. Also check to see if everything is seated correctly. Try one RAM stick at a time in each slot and do the same with the other. If that doesnt work check the cpu for bent pins

 

[FriendlyBTW]

I feel like it could be a cpu issue as all the pinned connections are in fine