Hi all, below is my existing setup:
MSI MAG Z390 TOMAHAWK 1151 DDR4 ATX Motherboard
Intel Core i5 9600K 3.7 GHz Processor
Corsair Vengeance RGB Black PRO 16GB (2 x 8GB) DDR4 2666MHz
MSI GeForce RTX 2060 VENTUS 6GB OC Graphics Card
I have purchased another 16gb of RAM exactly the same model as already in my machine to increase the capacity to 32gb. After installing my PC starts up but no display is shown and no keyboard lights up ect. On my mother board the DRAM light is on an occasional flicks to the CPU light under the EZZ debug LEDs. Anyone able to help me resolve? If i take the two new RAM cartridges out PC starts up just fine. Existing RAM installed in slots 3 & 4 if that helps?
MSI MAG Z390 TOMAHAWK 1151 DDR4 ATX Motherboard
Intel Core i5 9600K 3.7 GHz Processor
Corsair Vengeance RGB Black PRO 16GB (2 x 8GB) DDR4 2666MHz
MSI GeForce RTX 2060 VENTUS 6GB OC Graphics Card
I have purchased another 16gb of RAM exactly the same model as already in my machine to increase the capacity to 32gb. After installing my PC starts up but no display is shown and no keyboard lights up ect. On my mother board the DRAM light is on an occasional flicks to the CPU light under the EZZ debug LEDs. Anyone able to help me resolve? If i take the two new RAM cartridges out PC starts up just fine. Existing RAM installed in slots 3 & 4 if that helps?