[SOLVED] PC wont post with new AMD GPU

[rangafromtonga]

Whenever I try to get into windows with my new (tested and working) rx 580, the pc will boot but wont post. Have attempted to use a gtx 780 and it posts and used the 580 in another system and vice versa. Can only get into windows using the i3 8100's igpu. The motherboard is a b360m-hd3.

Ive always had problems moving to amd gpus, so is there some sort of amd setting in bios or summit? Idk someone help pls lol

 

[rangafromtonga]

Edit: the mobo is a h310m-s2h

 

[kerberos_20]

POST is Power On Self Test
it happens durin BIOS initialisation, if u see windows logo (or any other OS loading screen), then POST was succesfull

as for windows goes
go into safe mode (3x reboot during windows loading to load repair menu, then choose troubleshoot -> advanced options -> startup settings -> restart. once rebooted hit F4 key on menu)

once in safe mode, run DDU to uninstall your current drivers
reboot and install new gpu drivers

 

[rangafromtonga]

Edit: the mobo is a h310m-s2h

POST is Power On Self Test
it happens durin BIOS initialisation, if u see windows logo (or any other OS loading screen), then POST was succesfull

as for windows goes
go into safe mode (3x reboot during windows loading to load repair menu, then choose troubleshoot -> advanced options -> startup settings -> restart. once rebooted hit F4 key on menu)

once in safe mode, run DDU to uninstall your current drivers
reboot and install new gpu drivers

Post = something on the display. I get nothing with the card in, should i enter safe mode without the card in?

 

[Gandalf76]

ok put the nvidia card in get into windows run ddu then shutdown swap cards and reboot...

get ddu from above reply link...

 

[rangafromtonga]

Tried that already unfortunately

 

[Gandalf76]

did u plug in the right power cables into the card?

 

[Gandalf76]

does the cpu fan spin up with the 580 in it?
r u using the same cable for the display on both cards??? as in both via display port or both via hdmi
???

i tried switching my pc same card but from hdmi to dp and had to boot into windows without a screen leave it a good 5 mins then press powerbutton to shut down (soft off from powerbutton not 5 second press) then rebooted and it took a few seconds longer but booted normally and screen then worked...

 

[Gandalf76]

give it some time as its got to do a windows update to find and install drivers

 

[rangafromtonga]

Yeah the fans turn on then turn off, nothings working imma just swap the gpus.

 

[Gandalf76]

how many watts is ure psu?

 

[Gandalf76]

sounds like a power issue did u plug in the extra power cabbles into mb?

 

[Gandalf76]

l checked google images of that board it has an 8 pin power soc near rear io panel

 

[Gandalf76]

how many watts is your power supply???? need to know this!!!

 

[Gandalf76]

think u need 650watts for that card

 

[rangafromtonga]

Nope. 600w psu same as the other psu 600w, 8 pin is also plugged in, nothing isnt plugged in etc

 

[Gandalf76]

have u tried reseting ure bios?
mine powercycles 3 times b4 it boots after bios reset...

 

[G4nd4lf]

and the 580 worked on the other system with the 600w psu??? coz im pretty sure they recommend a 650w! i have have the same card...

same guy on my other acc...
\

 

[rangafromtonga]

Yep, same wattage

 

[rangafromtonga]

Figured it out, i let it run and it ended up installing its very own driver after 30 minutes of it just sitting there powered on...pcs fkn suck.