Question Pc wont wake up from sleep with new psu

[monoman12]

So i bought a new psu (msi mag 650bn) couple of months ago but i realized that issue recently. Whenever my pc go sleep, if i press keyboard or mouse to wake it up, fans are start spinning and rgb lights on the case turns on but no power to keyboard mouse and no signal on monitor. I have to turn on and off my psu's power switch to restart the pc everytime this happens. Also if i flick the power supply switch off then back on right away when trying to wake up from sleep, pc stops working and starts again instantly but still no power to anything except to case fans and rgbs on the case. I have to wait for couple of seconds before i flick to psu power switch on to completely shut down the pc. I also tried my old psu and i had no issue with that one
Also i had no problem with any stress test or games what so ever. I have tried occt power test at extreme, prime 95, furmark etc.
specs:
CPU: RYZEN 5 5500
MOBO: BIOSTAR A520MT
GPU: RTX 4060
RAM: Twinmos 2x8 ddr4
PSU: MSİ MAG 650BN
OS: WİN 11 HOME

 

[Ralston18]

Did you use only the cables that came with the new PSU?

Update your post to include full system hardware specs and OS information.

 

[monoman12]

Did you use only the cables that came with the new PSU?

Update your post to include full system hardware specs and OS information.

I tried couple of different cables and same thing happens. I updated the post with my specs.

 

[Ralston18]

You should be using only the cables that came with the new PSU.

= = = =

Will the system boot into Safe Mode and run without any problems?

= = = =

Take a look at the currrent power settings using "powercfg /list".

FYI:

https://learn.microsoft.com/en-us/w...ice-experiences/powercfg-command-line-options

Then disable all power savers, screen savers, etc., to determine if the problem stops.

 

[monoman12]

You should be using only the cables that came with the new PSU.

= = = =

Will the system boot into Safe Mode and run without any problems?

= = = =

Take a look at the currrent power settings using "powercfg /list".

FYI:

https://learn.microsoft.com/en-us/w...ice-experiences/powercfg-command-line-options

Then disable all power savers, screen savers, etc., to determine if the problem sto

You should be using only the cables that came with the new PSU.

= = = =

Will the system boot into Safe Mode and run without any problems?

= = = =

Take a look at the currrent power settings using "powercfg /list".

FYI:

https://learn.microsoft.com/en-us/w...ice-experiences/powercfg-command-line-options

Then disable all power savers, screen savers, etc., to determine if the problem stops.

hey i tried to boot in safe mode and when i put my pc to sleep, same thing happened. im sending the video here. im also using the psu's original power cable.

View: https://www.youtube.com/shorts/Uy0GGr7NUDI