Question PLEASE HELP me with my first PC Build

[glued]

PCPARTPICKER shows error​

"*Note: A USB 3.2 Gen 2 to USB 3.2 Gen 1 header adapter is required."

Can I fix this issue with this product: https://nzxt.com/product/internal-usb-hub-gen-3

Here's the build link: https://pcpartpicker.com/list/nbyxdH

Can someone tell me what's wrong and link product I need to buy, its my first time building a pc.

 

[helper800]

Just to be clear to everyone looking at this post, The motherboard has a USB 3.2 Gen 2 type-C header and a USB 3.2 Gen 1 type-A header for front I/O. The case has a USB 3.2 Gen 1 Type-C and a USB 3.2 Gen 1 Type-A for front I/O. The OP's link for the NZXT product does not work. Here is the PDF for his motherboard.

The port on the case is slower (5 gb/s) than what the I/O header (10gb/s) on the motherboard is capable of and that is all. I believe there is no incompatibility.

 

[glued]

Just to be clear to everyone looking at this post, The motherboard has a USB 3.2 Gen 2 type-C header and a USB 3.2 Gen 1 type-A header for front I/O. The case has a USB 3.2 Gen 1 Type-C and a USB 3.2 Gen 1 Type-A for front I/O. The OP's link for the NZXT product does not work. Here is the PDF for his motherboard.

The port on the case is slower (5 gb/s) than what the I/O header (10gb/s) on the motherboard is capable of and that is all. I believe there is no incompatibility.

So which product do I need to buy to fix this? Can you link it?

 

[helper800]

So which product do I need to buy to fix this? Can you link it?

No product required. You can connect the case's USB 3.2 gen 1 type-C connector to the motherboard's USB 3.2 gen 2 type-c header.