please help

[Guest]

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

im not sure if this is exacly a motherboard problem but when i start up the comp sometimes is says that hardare monitor found a problem, when i check it is says that the 5v+ circuit is only at about 4.5v. all yesterday my comp wouldnt work properly. it would freeze up at the windows loading screen or at best at the logon screen.


ben.riesinger@booomail.com

 

[BigJim]

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

with no info on your system a guess would be loose main power connector or
the power supply is going bad.

<ben.riesinger@realcredits.com> wrote in message
news:7e9b7$43393cef$d99c5301$21452@allthenewsgroups.com...
> im not sure if this is exacly a motherboard problem but when i start up
> the comp sometimes is says that hardare monitor found a problem, when i
> check it is says that the 5v+ circuit is only at about 4.5v. all yesterday
> my comp wouldnt work properly. it would freeze up at the windows loading
> screen or at best at the logon screen.
>
>
> ben.riesinger@booomail.com

 

[jad]

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

<ben.riesinger@realcredits.com> wrote in message
news:7e9b7$43393cef$d99c5301$21452@allthenewsgroups.com...
> im not sure if this is exacly a motherboard problem but when i start up
the comp sometimes is says that hardare monitor found a problem, when i
check it is says that the 5v+ circuit is only at about 4.5v. all yesterday
my comp wouldnt work properly. it would freeze up at the windows loading
screen or at best at the logon screen.
>
>
> ben.riesinger@booomail.com


Nice to have that warning in the bios.....but as Big J said power supply and
its connections are suspect.

 

[Guest]

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

Apparently your computer's power supply unit is failing.

--
DaveW
__________

<ben.riesinger@realcredits.com> wrote in message
news:7e9b7$43393cef$d99c5301$21452@allthenewsgroups.com...
> im not sure if this is exacly a motherboard problem but when i start up
> the comp sometimes is says that hardare monitor found a problem, when i
> check it is says that the 5v+ circuit is only at about 4.5v. all yesterday
> my comp wouldnt work properly. it would freeze up at the windows loading
> screen or at best at the logon screen.
>
>
> ben.riesinger@booomail.com

 

[Guest]

Archived from groups: alt.comp.hardware.pc-homebuilt (More info?)

ben.riesinger@realcredits.com wrote:
> im not sure if this is exacly a motherboard problem but when i start up the comp sometimes is says that hardare monitor found a problem, when i check it is says that the 5v+ circuit is only at about 4.5v. all yesterday my comp wouldnt work properly. it would freeze up at the windows loading screen or at best at the logon screen.

Normally means you have to buy a more powerfull power supply (e.g.: if
your current one is 200W total, buy a 300W or more).

It can also be (particulary when you have both the +5V and -5V displayed
and they have diffrent values), that you have some stuff loosely hooked
onto the power cords inside the computer (usually a DIY cooling fan
'connector').

--
Model: INFJ
Primary function: Coprocessor
Secondary function: Cluster commander

Yes I'm a therian:
http://www.wikitherian.org

Creationism & Darwin:
"The bible says humans were
supposed to use animals to
do work for them and I like
to work so I must be an animal!"