Please look over my settings!

bpfergu

Distinguished
Jun 20, 2009
33
0
18,530
Do these look good? Am I getting enough voltage to everything? ISO opinions from people who know more than me. :)

I'm running i7 920 D0 stepping and 6 gig DDR3 1600 RAM on Blood Rage board. Using TRUE CPU cooler. Currently my i7 is OCed to 3.6 and I don't plan on taking it much higher than that.

One thing: my BIOS doesn't show the actual overall voltage, but rather just how much I have "added" to the factory voltage. I had to go into CPUZ to pull up the actual voltage numbers for the CPU.

Voltages:
CPU Core voltage = +20 mV (It runs at 1.12V at idle and 1.152V under load)
CPU uncore voltage = +20 mV
GPL = 1.8
DRAM = 1.6
x58 IOH core = 1.10

Multipliers:
Block = x200
QPI = x18
Cpu Core = x18
Uncore = x16
Memory = x8

At idle the cores are running low, low 40s and under full load they are in the low to mid 60s after 45 min on Prime95.

Thanks in advance!
 

dasjap

Distinguished
Jul 17, 2008
25
0
18,530


You give it more than enough, my D0 runs 3,6Ghz at 1,093 stabel in prime95, my Dram is no more than 1,56 at 4,0Ghz.