Question plug in a fan hub to the PSU and then to motherboard?

[Kcredden1]

Guys: I bought a Sama T501 RGB case for my new build, and I'm not at all sure what the heck to do. It's got fans already installed, but the connection cables aren't loose but plugged into a fan hub.

First
how does one plug a fan hub into a motherboard?

Then how does it plug into the PSU? I can't find information anywhere

 

[dwd999]

Guys: I bought a Sama T501 RGB case for my new build, and I'm not at all sure what the heck to do. It's got fans already installed, but the connection cables aren't loose but plugged into a fan hub.

First
how does one plug a fan hub into a motherboard?

Then how does it plug into the PSU? I can't find information anywhere

There should be a wiring diagram included with the case. Is there are sata power connector on one end (the right side) of the hub? That would be connected to the psu. Is there an aura adaptor among the parts? That would connect to the lower left corner of the hub, to the left of the fan outputs, and then connect to the motherboard's aura port.

 

[Kcredden1]

There should be a wiring diagram included with the case. Is there are sata power connector on one end (the right side) of the hub? That would be connected to the psu. Is there an aura adaptor among the parts? That would connect to the lower left corner of the hub, to the left of the fan outputs, and then connect to the motherboard's aura port.

Thanks for the reply and sorry for the delay. Life.

I did finally find the diagram and still had to go around the net to find out how to plug it into the MB. But it's finally running and running just fine. This was the most difficult build I ever did, and I've been building since the mid 90s. But now I learned enough to build another if needed. I also know where to go for help. Thanks again!