i recently bought a new motherboard as i needed to get a replacement for an msi z97s sli krait edition and after 2 weeks of msi not reponding to me i just decided to buy the same motherboard again and just sell the one they give me back cause i wanted to use the pc as soon as possible. when i was installing my hyper 212 evo i slightly nudged one of the capacitors around the cpu socket and there is a small scratch on it which i am not all too concerned about as it is not leaking or dented, but the capacitor appears to be at a slight angle from the board but is still functioning as it should and still sits on the motherboard with stability (e.g does'nt wobble etc.) and the pc appears to be working fine, my only real concern is if this could cause any reduction in performance and any issues in the future also any reduced over clocking capability etc. i have only been building pcs and stuff for a year and a half now which i guess is short by some standards so im still kinda new to a lot of things XD so sorry if it sounds a little stupid.