[SOLVED] Power problem on Lian Li PC-011 Dynamic case ?

[Justhereforaq]

Hello all, I have a Asus rog Strix b550 mobo and a Lian Li PC-011 Dynamic case. The LEDs work and all but no matter which pin I put the power sw in, it doesn’t come on. I know my mb is fine. Any one have an idea on how to fix it ?

 

[mamasan2000]

Did you check your mobo manual? It will say which 2 pins you need. Black is ground IIRC. If it's the wrong way around, nothing will happen. Just need to rotate it correctly.

 

[Justhereforaq]

Did you check your mobo manual? It will say which 2 pins you need. Black is ground IIRC. If it's the wrong way around, nothing will happen. Just need to rotate it correctly.

Yeah, I followed the orientation to the t

 

[mamasan2000]

And you connected to the pins at the bottom rightmost pins? Is the power button on the case connected to the wires? Try a screwdriver: https://www.gamersnexus.net/guides/2011-jumping-a-motherboard-without-power-switch-button
If it still doesn't work, it's something else.

 

[Justhereforaq]

Yeah everything is where it’s supposed to be, the screwdriver method didn’t work

 

[HappyTrails]

Same exact setup here. Not the expert here but if screwdriver method no work then would not motherboard be defected? Have used this many times recently trying to figure out problem that was a bad gpu.

 

[Justhereforaq]

It was kinda close, my ram was defective so I had to swap them out and everything booted lol