I am about to take delivery of a new Western-Digital WD10EZEX Blue 1TB 7200rpm SATA 6Gb/s 64MB Cache 3.5 Inch Internal Hard Drive which I will be installing in a spare Vantec NexStar 6G Black 3.5" SATA III 6 Gbp/s to USB 3.0 External Hard Drive Enclosure.
The purpose of this drive is to backup my three internal drives, namely 2-SSD and 1-HDDand I am not sure how I need to prepare the drive to achieve this. Should I format and partition the drive into 3 partitions in order to accommodate the internal drives according to the various sizes and what else is would be necessary to ensure that the system will perform according to my requirements?
O.S. Windows 10 64 Bit.
I look forward to receiving advice from the forum.
The purpose of this drive is to backup my three internal drives, namely 2-SSD and 1-HDDand I am not sure how I need to prepare the drive to achieve this. Should I format and partition the drive into 3 partitions in order to accommodate the internal drives according to the various sizes and what else is would be necessary to ensure that the system will perform according to my requirements?
O.S. Windows 10 64 Bit.
I look forward to receiving advice from the forum.