My HP Spectre x360 13 came with hynix M.2 2280 PCIe NVMe 256GB SSD. I've replaced this with HP EX950 512GB SSD. The laptop is running perfectly ok.
I purchased an USB3.1 supported M.2 SSD enclosure (metalic) with M key to use hynix 256GB SSD. The enclosure with 256GB SSD worked fine and file read/write was ok (data transfer speed was about 300 MBps). But the problem was the enclosure become very hot. I checked temperature with crystal disk info and found above 55°c. Note that the new 512GB SSD in laptop remains near 30°c.
Then I deleted partitions and format the old SSD in NTFS. Everything remains same. Then I again tried to format with ExFAT settings quick format checkbook unchecked in my laptop powered by Windows 10. Then the horrible thing happened by giving error. The storage lost. I tried to attach and detach the external drive several times but Windows is unable to detect the storage. When I open windows disk management, it give prompt to make the new disk online. After clicking ok it gives error.
What could be the issue and how it can be resolved?
I purchased an USB3.1 supported M.2 SSD enclosure (metalic) with M key to use hynix 256GB SSD. The enclosure with 256GB SSD worked fine and file read/write was ok (data transfer speed was about 300 MBps). But the problem was the enclosure become very hot. I checked temperature with crystal disk info and found above 55°c. Note that the new 512GB SSD in laptop remains near 30°c.
Then I deleted partitions and format the old SSD in NTFS. Everything remains same. Then I again tried to format with ExFAT settings quick format checkbook unchecked in my laptop powered by Windows 10. Then the horrible thing happened by giving error. The storage lost. I tried to attach and detach the external drive several times but Windows is unable to detect the storage. When I open windows disk management, it give prompt to make the new disk online. After clicking ok it gives error.
What could be the issue and how it can be resolved?
Last edited: