My computer starts up and all I get is a blank screen and a continuous beep! I checked my motherboard's manual and interpreted the beep message as "Memory Installation Error" So I reinserted my RAM and even tried replacing it with a new one and it was still the same! So, I'm guessing there is a problem with the RAM slot itself. My motherboard has two memory slots and one of the slots stopped working a long time ago! So, it might be possible that this time the second slot went out as well!
So, here's my question :
Is it definitely the RAM slot or could it might be some other problem ?
Also, could the RAM slot be repaired or do I have to buy a new motherboard?
ADDITIONAL DETAILS
_
Motherboard - Gigabyte GA M61PME S2 (6 Year Old)
_
RAM - AData 4GB DDR2 667 MHz
_
To ensure that the problem is not with the PSU, I have checked the rail voltage readings with a DMM. Here are the readings (without any load) -
RED = 5.24 V
BLUE = -11.08 V
ORANGE = 3.22 V
GRAY = 5.21 V
PURPLE = 5.11 V
YELLOW = 11.97 V
Thanks,
Madhurjya Roy
So, here's my question :
Is it definitely the RAM slot or could it might be some other problem ?
Also, could the RAM slot be repaired or do I have to buy a new motherboard?
ADDITIONAL DETAILS
_
Motherboard - Gigabyte GA M61PME S2 (6 Year Old)
_
RAM - AData 4GB DDR2 667 MHz
_
To ensure that the problem is not with the PSU, I have checked the rail voltage readings with a DMM. Here are the readings (without any load) -
RED = 5.24 V
BLUE = -11.08 V
ORANGE = 3.22 V
GRAY = 5.21 V
PURPLE = 5.11 V
YELLOW = 11.97 V
Thanks,
Madhurjya Roy