Hey guys! This is my first post here. I just built my first gaming PC but I'm already having problems. :-/
My PC:
Ryzen 5 2600
GeForce GTX 1660
Motherboard ASRock B450M Pro4
Power Supply Corsair TX650m
2x8GB Ram (DDR4 3000MHZ)
PCIe wi-fi card
When I turn the PC on, sometimes after like 10sec, it turns off and turns on again, automatically. I don't have video signal in this situation. Sometimes it goes past the boot sequence into the Windows sequence but then I get a blue screen of the death. Sometimes I turn it on, everything goes on but I have no video signal. Sometimes out of nowhere my computer just resets. If the computer goes into sleep mode, I can't make it come back (only thing that works is forcing turn-off and then turn on again). Usually I have to force turn-off and then turn on again and it will eventually go through the whole booting and I can normally use the PC. But this shouldn't be happening. I don't understand what's the issue. I thought about the power supply but I'm pretty sure it's more than enough for my build. Anyway, any ideas? Maybe I screwed up something when building it? I though maybe it's the power switch thing? I saw in the motherboard manual that it has a Power + ground pin but I don't know which one is which in the case's switch thing. I plugged one way and it worked so I'm assuming it's correct. Another thing is that my case came with pre-assembled stand-off for the motherboard (but still had 1 extra in a small bag) so I'm guessing that it's not short circuit.
I really appreciate any help. Thank you very much!
My PC:
Ryzen 5 2600
GeForce GTX 1660
Motherboard ASRock B450M Pro4
Power Supply Corsair TX650m
2x8GB Ram (DDR4 3000MHZ)
PCIe wi-fi card
When I turn the PC on, sometimes after like 10sec, it turns off and turns on again, automatically. I don't have video signal in this situation. Sometimes it goes past the boot sequence into the Windows sequence but then I get a blue screen of the death. Sometimes I turn it on, everything goes on but I have no video signal. Sometimes out of nowhere my computer just resets. If the computer goes into sleep mode, I can't make it come back (only thing that works is forcing turn-off and then turn on again). Usually I have to force turn-off and then turn on again and it will eventually go through the whole booting and I can normally use the PC. But this shouldn't be happening. I don't understand what's the issue. I thought about the power supply but I'm pretty sure it's more than enough for my build. Anyway, any ideas? Maybe I screwed up something when building it? I though maybe it's the power switch thing? I saw in the motherboard manual that it has a Power + ground pin but I don't know which one is which in the case's switch thing. I plugged one way and it worked so I'm assuming it's correct. Another thing is that my case came with pre-assembled stand-off for the motherboard (but still had 1 extra in a small bag) so I'm guessing that it's not short circuit.
I really appreciate any help. Thank you very much!
Facebook
Twitter
Instagram