Hi guys,
I had my EVGA 850 watt power supply blow up while playing, I replaced it immediately the next day and also got a newer heatsink for my CPU. I plugged in everything correctly as it was before the PSU was replaced and also put in the new heat sink, (same model but now an RGB variant) and triple checked the screws were not tight and the cpu was seated correctly.
System turned on CPU code 4C flashed briefly and got stuck on CC with all four sticks in. I then started troubleshooting each slot and I found only B1 and B2 will work.
I cannot use the other A1 or A2 slots at all or it will not go into POST and the DRAM light on my motherboard will stay illuminated. So for now, I'm running 16GB of ram because of my other two slots are not working properly.
Everything was working fine before I replaced the cooler and PSU.
Here are my specs:
i7 9700k
2080 Super FE
32GB of gSkill Ripjaws 2133 speed (now 16GB)
New Psu is a EVGA 750watt supernova fully modular
Motherboard is a ASUS Maximus XI Hero
I had my EVGA 850 watt power supply blow up while playing, I replaced it immediately the next day and also got a newer heatsink for my CPU. I plugged in everything correctly as it was before the PSU was replaced and also put in the new heat sink, (same model but now an RGB variant) and triple checked the screws were not tight and the cpu was seated correctly.
System turned on CPU code 4C flashed briefly and got stuck on CC with all four sticks in. I then started troubleshooting each slot and I found only B1 and B2 will work.
I cannot use the other A1 or A2 slots at all or it will not go into POST and the DRAM light on my motherboard will stay illuminated. So for now, I'm running 16GB of ram because of my other two slots are not working properly.
Everything was working fine before I replaced the cooler and PSU.
Here are my specs:
i7 9700k
2080 Super FE
32GB of gSkill Ripjaws 2133 speed (now 16GB)
New Psu is a EVGA 750watt supernova fully modular
Motherboard is a ASUS Maximus XI Hero