[SOLVED] Ram issues

Page 2 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
Solution
A Quick Advice--------------------
you could try 1.25V as base and increase it till 1.35V. you should not directly jump to 1.35V instead do the least increment.
it should work under 1.35V.
This voltage is for 2933 Mhz but you can also try it with 3000 Mhz.
no worries anymore just sorted it i had mine in the 1 3 dim slots i had no idea as i didn't build it but i switched it to 2 and 4 and its all good running at 3200 now i appreciate all the help tho it means alot. https://www.userbenchmark.com/UserRun/39378844 alot better now
i would wait and see if someone responds to my plea for help. I have asked if someone will explain it to you. I don't actually know myself.
Yeah I can’t boot into windows as I tried to restart and it never finished it just went to a black screen for ages so I turned it off and ever since then I can’t boot I get greeted with a black screen.
 
i would wait and see if someone responds to my plea for help. I have asked if someone will explain it to you. I don't actually know myself.
yeah finally booted tho just took cmos batt out for a bit and my pc acc restarted is my cpu the one hindering my ram perf what do you think
 
When I put my MHz on 2933 I noticed quite a big difference because turning that up then allowed my cpu to perform better too noticed a huge difference on vr
You can have a look on RAM Overclocking Guide. This may help you. You can find all information related to RAM Overclocking.
If it seems very techy then you can search on YouTube for more practical guide.
 
Last edited:
A Quick Advice--------------------
you could try 1.25V as base and increase it till 1.35V. you should not directly jump to 1.35V instead do the least increment.
it should work under 1.35V.
This voltage is for 2933 Mhz but you can also try it with 3000 Mhz.
 
A Quick Advice--------------------
you could try 1.25V as base and increase it till 1.35V. you should not directly jump to 1.35V instead do the least increment.
it should work under 1.35V.
This voltage is for 2933 Mhz but you can also try it with 3000 Mhz.
no worries anymore just sorted it i had mine in the 1 3 dim slots i had no idea as i didn't build it but i switched it to 2 and 4 and its all good running at 3200 now i appreciate all the help tho it means alot. https://www.userbenchmark.com/UserRun/39378844 alot better now
 
Last edited:
Solution