Question RAM won't overclock to 3200Mhz ?

[FzNdr]

Hello everyone,

Im currently facing issues on my pc that has an i5-12400F and 32Gb of DDR4 ram which are advertised to run at 3200Mhz,
Currently using an esonic h610 motherboard that supports 3200mhz ram in dual channel mode as per the specifications below:

https://www.esonic.cn/product/esonic-h610-motherboard-ddr4-lga-1700-socket-micro-atx-mb/

I tried XMP profile 1 and it set the ram to 2667MT
then I tried XMP profile 2, and it lowered it to 2400MT

How can I make them run at their advertised speeds which is both supported by the ram stick, cpu and the board?

 

[drivinfast247]

What RAM? Is it on motherboard compatibility list?

 

[FzNdr]

What RAM? Is it on motherboard compatibility list?

they re both kingston furry 3200mh ram sticks and as for the motherboard, it says that it supports 3200mhz ram speeds

Esonic H610 motherboard ddr4 Lga 1700 socket micro atx mb​

-Supports LGA1700 12/13/14th Gen Intel® Core i3/i5/i7/i9/
-Pentium/Celeron series processors
-2* DDR4 UDIMM slot 3200MHz, up to 64GB
-3* SATA3.0 port 6Gb/s
-1* PCI Express X16 Gen 4.0 slot
-1* PCI Express X1 Gen 3.0 slot
-1* M.2_SSD support 2242/2280 NVMe/SATA SSD
-2 *USB 3.2GEN2ports
-2 *USB 3.2GEN1ports
-5 *USB 2.0 ports

 

[drivinfast247]

they re both kingston furry 3200mh ram sticks and as for the motherboard, it says that it supports 3200mhz ram speeds

Esonic H610 motherboard ddr4 Lga 1700 socket micro atx mb​

-Supports LGA1700 12/13/14th Gen Intel® Core i3/i5/i7/i9/
-Pentium/Celeron series processors
-2* DDR4 UDIMM slot 3200MHz, up to 64GB
-3* SATA3.0 port 6Gb/s
-1* PCI Express X16 Gen 4.0 slot
-1* PCI Express X1 Gen 3.0 slot
-1* M.2_SSD support 2242/2280 NVMe/SATA SSD
-2 *USB 3.2GEN2ports
-2 *USB 3.2GEN1ports
-5 *USB 2.0 ports

Both from one kit? *sold as a pair?

 

[FzNdr]

Both from one kit? *sold as a pair?

yes they were both sold to me by a reputable reseller in my country as a new kit of 2 stick 16Gb each ram

 

[drivinfast247]

yes they were both sold to me by a reputable reseller in my country as a new kit of 2 stick 16Gb each ram

Is BIOS up-to-date?

 

[FzNdr]

Is BIOS up-to-date?

i dont know where to look for bios updates there is nothing on the manufacturer's website

 

[boju]

Post screenshot of cpuz, both memory and spd tabs.

 

[--SID--]

Does the motherboard support XMP or only JEDEC?

 

[FzNdr]

Post screenshot of cpuz, both memory and spd tabs.

https://imgur.com/a/IaY1185

View: https://imgur.com/a/IaY1185


there

 

[FzNdr]

Does the motherboard support XMP or only JEDEC?

it does, i have XMP profiles in my bios

 

[Bob.B]

https://imgur.com/a/IaY1185

View: https://imgur.com/a/IaY1185


there

The stick you are showing is 2666 ram.
Show both sticks of ram.

 

[boju]

Only B*60 and Z*90 allow XMP above CPU memory controller but your cpu supports 3200 as native speed so XMP here is irrelevant to achieve that.

If your ram was indeed 3200, there should have been an XMP profile listed for that speed on the spd page which 2666 is the highest.

 

[FzNdr]

The stick you are showing is 2666 ram.
Show both sticks of ram.

https://imgur.com/a/okYkPTw

View: https://imgur.com/a/okYkPTw


this is the second stick

 

[Bob.B]

https://imgur.com/a/okYkPTw

View: https://imgur.com/a/okYkPTw


this is the second stick

You have 2 different sticks of ram a 2666 stick and a 3200 stick.

Consider returning the sticks to the merchant and then shop for a 2 stick kit of 3200 ram.

 

[JayGau]

So you bought two sticks from a "reputable" reseller who told you it was a new kit and it turns out to be two completely different sticks? I would advise to not buy from this reseller anymore.