hi
ive gone back to using my ryzen system.
r3 3200g
16gb ram 3200mhz (2x8gb running at 2933mhz)
1050 ti 4gb graphics card..
motherboard is "Asrock b450m pro4-f"
the issue i have is that i cant use dual channel memory.. the computer will boot with 1 stick in A1, and also boot with memory in A1+A2 (together), but if i put memory in to A1+B1 no post.(just constant reboot,like its testing). and if i put memory into A2 and B2, no post(like with a1+b1). i have swapped out ram for ddr4 2400mhz strips and i get same issue.. and today i got to install another cpu ryzen 5 5600g, (by friend bought around to test(as i was going to buy it),and still the same issue. so i know its not the CPU. (both sets of my ram worked in A1+A2 configuation, on this board, and my intel 11th gen setup).
before the r3 3200g cpu(only installed since december 2021), it had had a r7 2700x cpu (june 2021).and then it was running dual channel in A2+B2..
and help would be appreciated, im looking into getting another motherboard if this is not fixable.. it does run fine as single channel (A1+A2).
ive gone back to using my ryzen system.
r3 3200g
16gb ram 3200mhz (2x8gb running at 2933mhz)
1050 ti 4gb graphics card..
motherboard is "Asrock b450m pro4-f"
the issue i have is that i cant use dual channel memory.. the computer will boot with 1 stick in A1, and also boot with memory in A1+A2 (together), but if i put memory in to A1+B1 no post.(just constant reboot,like its testing). and if i put memory into A2 and B2, no post(like with a1+b1). i have swapped out ram for ddr4 2400mhz strips and i get same issue.. and today i got to install another cpu ryzen 5 5600g, (by friend bought around to test(as i was going to buy it),and still the same issue. so i know its not the CPU. (both sets of my ram worked in A1+A2 configuation, on this board, and my intel 11th gen setup).
before the r3 3200g cpu(only installed since december 2021), it had had a r7 2700x cpu (june 2021).and then it was running dual channel in A2+B2..
and help would be appreciated, im looking into getting another motherboard if this is not fixable.. it does run fine as single channel (A1+A2).