CPU:
AMD Phenom II X3 720 , OC @3200 Mhz | XIGMATEK Gaia SD1283 Cooler
CPU Multiplier 16x
CPU FSB 201.2 MHz (original: 200 MHz)
HyperTransport Clock 1619.7 MHz
North Bridge Clock 2008.0 MHz
DRAM:FSB Ratio 20:6
RAM:
Memory Timings 9-9-9-24 (CL-RCD-RP-RAS)
Command Rate (CR) 2T
DIMM1: Kingston 99U5403-002.A00LF 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM2: Kingston 9905402-015.A03LF 1 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM3: Samsung M378B5673EH1-CH9 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM4: Kingston 9905402-015.A03LF 1 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
Total: 6GB
Motherboard:
GA-970A-D3
Video Adapter Gigabyte Radeon HD 6850
--------------------------------------------------------------------------------
Voltages:
CPU VID 1.3250 V
CPU Core 1.360 V
North Bridge VID 1.2000 V
+3.3 V 3.360 V
+12 V 12.049 V
VBAT Battery 3.280 V
DIMM 1.472 V
Power Supply: Gigabyte 550W Peak
--------------------------------------------------------------------------------
I've read a quite a few forums saying that adjusting RAM timing will alter the speed of the RAM.
My question is should I increase the speed of the RAM or decrease the timing? Or should I Increase speed AND Decrease timing?
Any suggestions on the voltage adjustments?
As for the CPU overclocking, can I overclock it further?
Thanks.
AMD Phenom II X3 720 , OC @3200 Mhz | XIGMATEK Gaia SD1283 Cooler
CPU Multiplier 16x
CPU FSB 201.2 MHz (original: 200 MHz)
HyperTransport Clock 1619.7 MHz
North Bridge Clock 2008.0 MHz
DRAM:FSB Ratio 20:6
RAM:
Memory Timings 9-9-9-24 (CL-RCD-RP-RAS)
Command Rate (CR) 2T
DIMM1: Kingston 99U5403-002.A00LF 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM2: Kingston 9905402-015.A03LF 1 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM3: Samsung M378B5673EH1-CH9 2 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
DIMM4: Kingston 9905402-015.A03LF 1 GB DDR3-1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz)
Total: 6GB
Motherboard:
GA-970A-D3
Video Adapter Gigabyte Radeon HD 6850
--------------------------------------------------------------------------------
Voltages:
CPU VID 1.3250 V
CPU Core 1.360 V
North Bridge VID 1.2000 V
+3.3 V 3.360 V
+12 V 12.049 V
VBAT Battery 3.280 V
DIMM 1.472 V
Power Supply: Gigabyte 550W Peak
--------------------------------------------------------------------------------
I've read a quite a few forums saying that adjusting RAM timing will alter the speed of the RAM.
My question is should I increase the speed of the RAM or decrease the timing? Or should I Increase speed AND Decrease timing?
Any suggestions on the voltage adjustments?
As for the CPU overclocking, can I overclock it further?
Thanks.