sharath_83

Distinguished
Jun 22, 2015
78
2
18,535
Hi all,

Currently i have G.Skill Ripjaws 16GB X 2 (3600 Mhz) RAM, when i checked for the same make and model, for availability from 5 different computer hardware store, only 2 had them, but i was also checking for 32GB X 4 (3600 Mhz), price is still high, and one store was like you get only 2400 Mhz.

So i was like what is point in spending that much and only to get 2400 out of 3600. May i know why is that?

Should i still go for 16GB X 2 (which am not sure can be sold in future or how much i can sell for upgrading further) , or spend on 32GB X 4 (but which gives 2400 Mhz)?

Or should i try some other brand?

My desktop configuration are as below:
CPU: AMD Ryzen 7 3700X 3rd Gen
Motherboard: ASUS ROG Crosshair HERO VIII
RAM: G.Skill Ripjaws V 16 GB X 2 (32GB) 3600Mhz
Graphic Card: Sapphire Radeon RX580 8GB DDR5
SMPS Power Supply - Cooler Master 750W 230V
Cabinet - Cooler Master MasterBox MB511 RGB
 

Lutfij

Titan
Moderator
but i was also checking for 32GB X 4 (3600 Mhz), price is still high, and one store was like you get only 2400 Mhz.
This store you speak of, did the salesman say that you won't be able to go to DDR4-3600MHz? If so, then you should go and tell him to stop with the misinformation. Just an FYI, you would be adding stress to your memory controller and you might have to run your ram at DDR4-3200MHz but not as low as DDR4-2400MHz.

As for your ram kit, source the exact same kit you have, all the way down to the part number(not the serial number). Prior to dropping in anymore ram, make sure you're on the latest BIOS version for your motherboard.
 

sharath_83

Distinguished
Jun 22, 2015
78
2
18,535
but i was also checking for 32GB X 4 (3600 Mhz), price is still high, and one store was like you get only 2400 Mhz.
This store you speak of, did the salesman say that you won't be able to go to DDR4-3600MHz? If so, then you should go and tell him to stop with the misinformation. Just an FYI, you would be adding stress to your memory controller and you might have to run your ram at DDR4-3200MHz but not as low as DDR4-2400MHz.

As for your ram kit, source the exact same kit you have, all the way down to the part number(not the serial number). Prior to dropping in anymore ram, make sure you're on the latest BIOS version for your motherboard.

Noted on the Part number and BIOS update.

Salesman was like you can buy DDR4-3600Mhz, but it only uses upto 2400 Mhz, which i didn't understand, then i was like why spend so much for 3600 and get less speed.

Just an FYI, you would be adding stress to your memory controller and you might have to run your ram at DDR4-3200MHz but not as low as DDR4-2400MHz. --- So using a RAM at higher speed is not recommended?
 
Hi all,

Currently i have G.Skill Ripjaws 16GB X 2 (3600 Mhz) RAM, when i checked for the same make and model, for availability from 5 different computer hardware store, only 2 had them, but i was also checking for 32GB X 4 (3600 Mhz), price is still high, and one store was like you get only 2400 Mhz.

So i was like what is point in spending that much and only to get 2400 out of 3600. May i know why is that?

Should i still go for 16GB X 2 (which am not sure can be sold in future or how much i can sell for upgrading further) , or spend on 32GB X 4 (but which gives 2400 Mhz)?

Or should i try some other brand?

My desktop configuration are as below:
CPU: AMD Ryzen 7 3700X 3rd Gen
Motherboard: ASUS ROG Crosshair HERO VIII
RAM: G.Skill Ripjaws V 16 GB X 2 (32GB) 3600Mhz
Graphic Card: Sapphire Radeon RX580 8GB DDR5
SMPS Power Supply - Cooler Master 750W 230V
Cabinet - Cooler Master MasterBox MB511 RGB
Would you consider going to 2x32GB?

Seems to be a few to pick from.
https://pcpartpicker.com/products/memory/?compatible_with=L23mP6#Z=65536002&S=3400,3733