Hey Ya'll, first of all, sorry if this has already been solved somewhere else but I was not able to find anything on the first 2 pages of google that worked for me.
I purchased the HyperX Fury 16gb 3200mhz DDR4 CL15 DIMM (x2 32gb total) for my system a while ago, I didn' realize it had been running at 2400mhz this whole time.
I went into the bios of my MSI Z490 mobo and enabled the XMP profile which auto switched the "DRAM" from 2400 to 3200Mhz. Unfortunately, when I attempt to boot after making this change it cycles into the error "Previous overclock settings failed, system boot with default setting and placed previous settings in BIOS menu"
I tried doing 2500mhz, 2800mhz and 3000mhz instead of the 32 but none worked.
I cannot figure it out and would love to run the ram a little higher.
My specs are as follows:
I7 10700k (OC to 4.9ghz ((AFTER messing with the ram, me OC the cpu did not change anything))
RTX3090 (From prebuilt HP if that matters)
2 sets of Hyper X Fury 16gb 3200MHZ DDR4 CL15 (32GB total, 8gb Per stick)
MSI Z490 Gaming Edge Wifi (Latest BIOS 06/28/2021 ((updated bios after messing with ram, updating did not fix anything)) )
Seasonic 1000w PSU
I dont know much about OC, I just followed a youtube video on my specific cpu and a similair mobo. Which just enabled the XMP profile. Im not sure if the timing, voltage, etc is right. OR if my cpu cant handle it? Id like to get a higher speed so i can get more out of my overpriced system.
Thanks for reading and your time.
I purchased the HyperX Fury 16gb 3200mhz DDR4 CL15 DIMM (x2 32gb total) for my system a while ago, I didn' realize it had been running at 2400mhz this whole time.
I went into the bios of my MSI Z490 mobo and enabled the XMP profile which auto switched the "DRAM" from 2400 to 3200Mhz. Unfortunately, when I attempt to boot after making this change it cycles into the error "Previous overclock settings failed, system boot with default setting and placed previous settings in BIOS menu"
I tried doing 2500mhz, 2800mhz and 3000mhz instead of the 32 but none worked.
I cannot figure it out and would love to run the ram a little higher.
My specs are as follows:
I7 10700k (OC to 4.9ghz ((AFTER messing with the ram, me OC the cpu did not change anything))
RTX3090 (From prebuilt HP if that matters)
2 sets of Hyper X Fury 16gb 3200MHZ DDR4 CL15 (32GB total, 8gb Per stick)
MSI Z490 Gaming Edge Wifi (Latest BIOS 06/28/2021 ((updated bios after messing with ram, updating did not fix anything)) )
Seasonic 1000w PSU
I dont know much about OC, I just followed a youtube video on my specific cpu and a similair mobo. Which just enabled the XMP profile. Im not sure if the timing, voltage, etc is right. OR if my cpu cant handle it? Id like to get a higher speed so i can get more out of my overpriced system.
Thanks for reading and your time.