Hello
Making long story short, my PSU fried 2 HDD and 1 SSD in my PC few months ago after sending too much voltage. so whenever I was plugging these disks the PC would shutdown.
I learned about removing TVS diodes and it worked for both HDDs, they are back up and running, I didn't lose any data.
few days ago, I finally found the time to open up the SSD(its a SANDISK ULTRA II) but could not find any similar D3/D4 didoes like the WD HDDs had.
I am bit stuck at what to do next, I would not have the tool to check voltage and such on the board so hopefully people here woudl recognize the PCB and provide guidance at which things I need to remove to get back this SSD alive
View: https://imgur.com/a/YuA47im
thanks a lot!
Making long story short, my PSU fried 2 HDD and 1 SSD in my PC few months ago after sending too much voltage. so whenever I was plugging these disks the PC would shutdown.
I learned about removing TVS diodes and it worked for both HDDs, they are back up and running, I didn't lose any data.
few days ago, I finally found the time to open up the SSD(its a SANDISK ULTRA II) but could not find any similar D3/D4 didoes like the WD HDDs had.
I am bit stuck at what to do next, I would not have the tool to check voltage and such on the board so hopefully people here woudl recognize the PCB and provide guidance at which things I need to remove to get back this SSD alive
View: https://imgur.com/a/YuA47im
thanks a lot!