Clearing the BIOS password
The BIOS password is used to protect BIOS settings from unwanted changes. If you have forgotten your password you may disable password checking.
To erase the BIOS password follow these steps:
1.
Turn OFF the computer and unplug the power cord.
2.
Locate the jumper labeled CLR_PWD. The jumper is found at the lower right edge of the motherboard, near the SATA connectors.
3.
Move the jumper on jumper CLR_PWD to pins 2-3.
4.
Plug the power cord and turn ON the computer.
5.
Hold down the F1 key during the startup process and enter BIOS setup to change or clear the password.
6.
After changing or clearing the BIOS passwords, remember to turn off the computer and reset the jumper to pins 1-2.