Question Reuse old PC case, power supply and fan to build new PC

[peterng70]

Budget Range: affordable
System Usage : full stack software development. No games.
Preferred Website(s) for Parts: amazon.ca, newegg.ca
Location: Canada
Additional Comments:
This is my first pc build.
I am looking for a Ryzen 8500G, no dedicated GPU, no WiFi, no RGB system.
Can I reuse the PC case, power supply and fan from an old Acer prebuilt to build a new PC?
The case is 17x14x7 inches ( https://photos.app.goo.gl/P69GLsXSgD4kgfGCA ).
The old motherboard size is 9.6 × 8.9 in.
Will a 9.6-in x 9.6-in motherboard fit the old case?
The old case do not have a USB-C port, what is an affordable USB-C cable / adaptor as a workaround?
If the old case cannot be reused, please suggest an affordable, easy to setup case for MicroATX motherboard.
If I cannot reuse the 180W power supply, please suggest an affordable one.
Please also suggest affordable fans.

 

[Lafong]

Don't know how old that Acer is.

The older, the less likely it is to reuse the case.

A 180 watt PSU is virtually useless today. Even more so if old.

Regardless of age, pre-built PCs are notorious for being poor upgrade candidates.

I'd think for 200 or less Canadian, you could get a tolerable new case and power supply. The 8500G isn't power hungry as I recall.

Not sure what "affordable" means to you. 200 may be a very big deal?

 

[albertkao]

Don't know how old that Acer is.

The older, the less likely it is to reuse the case.

A 180 watt PSU is virtually useless today. Even more so if old.

Regardless of age, pre-built PCs are notorious for being poor upgrade candidates.

I'd think for 200 or less Canadian, you could get a tolerable new case and power supply. The 8500G isn't power hungry as I recall.

Not sure what "affordable" means to you. 200 may be a very big deal?

Would you mind suggesting link for a tolerable new case, power supply and fans?