Question rgb fans help

[mrmetallica]

aorus b550 elite v2 mobo
ryzen 7 5700 cpu
wd black 2tbssd
crucial pro ddr4 ram
znqi rgb fans
nitro sapphire graphics card
znqi rgb fans

the pc case has rgb fans there is a female block with 3 holes in which goes to the mobo
and one female connector with 3 pins i think its to ad more fans i plugged the female to the board they light up when switched on but dont spin any ideas please

 

[COLGeek]

Your fans should have two connectors. One for LEDs and the other for power. Are both attached?

 

[mrmetallica]

Your fans should have two connectors. One for LEDs and the other for power. Are both attached?

it looks like both wires go the one plug i think the fans are ionz

 

[COLGeek]

Do you have a link for the exact fans you are using?

 

[mrmetallica]

Do you have a link for the exact fans you are using?

they are ionz came with the case from amazon its a ionz kz -vf ultra aether pc gaming case

 

[COLGeek]

Take a picture of what you are talking about. Upload to a site like imgur.com and then post a link here.

 

[mrmetallica]

Take a picture of what you are talking about. Upload to a site like imgur.com and then post a link here.

here you cansee male and female connectors i assume the male is for more fans and the female is pluged into the mobo but fans only glow orange and dont spin

https://imgur.com/a/VHbCoPS

View: https://imgur.com/a/VHbCoPS

https://imgur.com/a/kpD3L9M

View: https://imgur.com/a/kpD3L9M

https://imgur.com/a/rNFRgD0

View: https://imgur.com/a/rNFRgD0

 

[COLGeek]

That white connector is only for the LEDs (that attach to the motherboard LED headers or to a LED/RGB controller). They are designed so that you can daisy chain multiple devices to a single header.

There should be another cable for power. Likely on the backside of the fans themselves in your first picture. Those should be attached directly to the motherboard fan headers or to a fan controller.

 

[mrmetallica]

That white connector is only for the LEDs (that attach to the motherboard LED headers or to a LED/RGB controller). They are designed so that you can daisy chain multiple devices to a single header.

There should be another cable for power. Likely on the backside of the fans themselves in your first picture. Those should be attached directly to the motherboard fan headers or to a fan controller.

i cant see anything else but ill have another look

 

[mrmetallica]

ive sorted it out they had connected all the connectors together in a loop lol . i thought all went to the female plug all spinning now cheers

 

[COLGeek]

Glad to help. Have fun!

 

[mrmetallica]

i will now im not pulling my hair out lol

 

[mrmetallica]

just one more question.
does the led switch plug go in the led demo socket ? cant find anything on the mobo book

https://imgur.com/a/xFRQ4uB

View: https://imgur.com/a/xFRQ4uB

https://imgur.com/a/fdkILFI

View: https://imgur.com/a/fdkILFI

 

[COLGeek]

just one more question.
does the led switch plug go in the led demo socket ? cant find anything on the mobo book

https://imgur.com/a/xFRQ4uB

View: https://imgur.com/a/xFRQ4uB

https://imgur.com/a/fdkILFI

View: https://imgur.com/a/fdkILFI

I'm not sure. What is the connector actually connected to? Post a picture of that, if possible.

I would not think so, by the way.

 

[mrmetallica]

I'm not sure. What is the connector actually connected to? Post a picture of that, if possible.

I would not think so, by the way.

its connected to the buttons on the top of the case just says led where the on button is etc . is ther a way to get the lights to change colour ? they only glow orange ive added a unit and it changes the colours but i would have thought they could change without

 

[COLGeek]

its connected to the buttons on the top of the case just says led where the on button is etc . is ther a way to get the lights to change colour ? they only glow orange ive added a unit and it changes the colours but i would have thought they could change without

Understood.

I haven't been able to find your exact case. In the backside of the case, does yours contain a fan/LED hub or controller? It will (usually) look rectangular with multiple headers for fans and LEDs. That would be the likely place to connect that to.