Question rgb fans help

[mrmetallica]

aorus b550 elite v2 mobo
ryzen 7 5700 cpu
wd black 2tbssd
crucial pro ddr4 ram
znqi rgb fans
nitro sapphire graphics card
znqi rgb fans

the pc case has rgb fans there is a female block with 3 holes in which goes to the mobo
and one female connector with 3 pins i think its to ad more fans i plugged the female to the board they light up when switched on but dont spin any ideas please

 

[COLGeek]

Your fans should have two connectors. One for LEDs and the other for power. Are both attached?

 

[mrmetallica]

Your fans should have two connectors. One for LEDs and the other for power. Are both attached?

it looks like both wires go the one plug i think the fans are ionz

 

[COLGeek]

Do you have a link for the exact fans you are using?

 

[mrmetallica]

Do you have a link for the exact fans you are using?

they are ionz came with the case from amazon its a ionz kz -vf ultra aether pc gaming case

 

[COLGeek]

Take a picture of what you are talking about. Upload to a site like imgur.com and then post a link here.

 

[mrmetallica]

Take a picture of what you are talking about. Upload to a site like imgur.com and then post a link here.

here you cansee male and female connectors i assume the male is for more fans and the female is pluged into the mobo but fans only glow orange and dont spin

https://imgur.com/a/VHbCoPS

View: https://imgur.com/a/VHbCoPS

https://imgur.com/a/kpD3L9M

View: https://imgur.com/a/kpD3L9M

https://imgur.com/a/rNFRgD0

View: https://imgur.com/a/rNFRgD0

 

[COLGeek]

That white connector is only for the LEDs (that attach to the motherboard LED headers or to a LED/RGB controller). They are designed so that you can daisy chain multiple devices to a single header.

There should be another cable for power. Likely on the backside of the fans themselves in your first picture. Those should be attached directly to the motherboard fan headers or to a fan controller.

 

[mrmetallica]

That white connector is only for the LEDs (that attach to the motherboard LED headers or to a LED/RGB controller). They are designed so that you can daisy chain multiple devices to a single header.

There should be another cable for power. Likely on the backside of the fans themselves in your first picture. Those should be attached directly to the motherboard fan headers or to a fan controller.

i cant see anything else but ill have another look

 

[mrmetallica]

ive sorted it out they had connected all the connectors together in a loop lol . i thought all went to the female plug all spinning now cheers

 

[COLGeek]

Glad to help. Have fun!

 

[mrmetallica]

i will now im not pulling my hair out lol