Right psu for the DFI nF4 mobo?

[daddydc650]

Would power supply go great with the new DFI Nforce4 SLI Expert motherboard (Enermax EG565P-FMA REV.2.0 ATX 2.01 w/SLI Support 535W) ??? I've read that I would need an 8-pin (+12V) EPS connector and that the psu has to have a native 24 pin connector also. I would more than likely purchase this psu from this website, http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=100122&AFFIL=pg&NR=1

 

[CD]

Would power supply go great with the new DFI Nforce4 SLI Expert motherboard (Enermax EG565P-FMA REV.2.0 ATX 2.01 w/SLI Support 535W) ??? I've read that I would need an 8-pin (+12V) EPS connector and that the psu has to have a native 24 pin connector also. I would more than likely purchase this psu from this website, http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=100122&AFFIL=pg&NR=1

Here is my suggestion:

http://www.monarchcomputer.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=M&Product_Code=100663&Category_Code=ps-ocz

I'm suggesting the OCZ Powerstream w/ adjustable rails since you are going with a DFI Expert mobo and I'm assuming you got that mobo because you are going to OC. For any system I build, the biggest factor involved when deciding on a PSU is stability....even more so if I plan to OC. The OCZ Powerstream 600W is very stable and having adjustable rails will make it even more so. 600W may be more than you need but it will mean you are ready for any future component additions without having to worry about power requirements. It's pricey but well worth it. Again, just my opinion.

 

[daddydc650]

It's aslo about 35-40 dollars more than the Enermax. I've already spent most of my budget on my new rig so I'm searching for something with stability and something that has at least 500w. I've read that the particular Enermax model I mentioned worked great with the DFI Expert board. The reason I posted was because I was wondering if the psu had all the correct connections for the DFI Expert mobo because the older Enermax model supposedly does not.

 

[fariss]

http://www.dfi-street.com/forum/forumdisplay.php?f=36

2nd sticky down

 

[daddydc650]

Very nice link! Thank you fariss.