Question Rog Loki 1200w/e870 crosshair USB power question

Jan 21, 2025
3
0
10
Hi Guys,
Im running into an issue with my PSU it has two 8pin connectors, my motherboard has two 8 pin CPU connectors which use these two up. The mother board also has and 8 pin USB power which i dont have space for on my PSU. So guys this is where i need your help, can i use a 6+2 on that 8pin usb power input under the ATX power input without toasting my MB? Heres the manual for help.

https://dlcdnets.asus.com/pub/ASUS/..._EM_V3_WEB.pdf?model=ROG CROSSHAIR X870E HERO

cooling-m.png

h732
 
Yes, why not? It's the same like a 8 pin PCIe on a GPU where you use a 6+2 pin connector too.

But what case do you use. SFX and SFX-L have extremely short cables that can't reach the connectors on the motherboard in ATX cases.
Using the RoG Hyperion, and ya i grabbed cable extentions from cablemod for it. i just know your not supposed to use 6+2 for CPU i was not 100% certin if it was ok for any PCIE power or just direct to Graphic cards.
 
i grabbed cable extentions from cablemod
Extensions cause issues, ecspecially with high end hardware. Longer cable and the extra set of connectors makes the voltage to low at the end of the cable. You better order some replacement cables that are just long enough. But why not bought an ATX PSU. It fits easily in the ROG Hyperion and it's cheaper. SFX-L is an odd solution.