Question RTC/UDP Shenanigans- DESPERATELY looking for a genius; WiFi hates voice calls ?

[Ralston18]

Not sure that I have correctly anf fully followed all of the above - still no harm in asking...

Does the Access Point have a static IP address reserved for the Access Point via the router?

Specifically a Static IP address that is reserved by the router using the Access Point's MAC and using an assigned Static IP address that is outside of the DHCP IP Range allowed to the router?

And how is the Access Point connected to the router? What ports if wired?

 

[StrawberryCookie]

Not sure that I have correctly anf fully followed all of the above - still no harm in asking...

Does the Access Point have a static IP address reserved for the Access Point via the router?

Specifically a Static IP address that is reserved by the router using the Access Point's MAC and using an assigned Static IP address that is outside of the DHCP IP Range allowed to the router?

And how is the Access Point connected to the router? What ports if wired?

Basically the technician said the old router isn't compatible hosting this new wifi by itself u_u

I'm not sure... where would I check in settings?

I do know we have a dynamic IP, like for example if our power goes out, when the router restarts when power is restored, our new IP is slightly different than the previous one

 

[lantis3]

See if you can find apps that auto starts on the android that might cause problems.

 

[StrawberryCookie]

See if you can find apps that auto starts on the android that might cause problems.

Not sure how that would interfere with UDP, also my mom would have to have the same issue too

(also why is Thomas678 in this thread just pasting one of my past replies 🧍‍♂️ Bot account?)

 

[lantis3]

Not sure how that would interfere with UDP, also my mom would have to have the same issue too

(also why is Thomas678 in this thread just pasting one of my past replies 🧍‍♂️ Bot account?)

No idea / running out of my ideas. It just seems you are not the only one have issues with Discord on the net.

 

[StrawberryCookie]

No idea / running out of my ideas.

I appreciate anything, you and everyone have been trying your best and it makes me really happy to be getting advice / having people investigate compared to Reddit where no one said anything at all 😔
If I get a new router soon and it's still being weird I'll update the post! I'll update it regardless if it works or not, to keep everything up to date

 

[lantis3]

Avoid routers with AI features. You will never know what they do in the background.

 

[StrawberryCookie]

Avoid routers with AI features. You will never know what they do in the background.

I just assumed they made speeds a bit better, but yeah.. Generally I don't trust AI powered things, like self driving cars are terrifying?!

Oh yeah I ask again, what's a good router to use? Is Netgear good? I've seen its name around

 

[lantis3]

I like wired ethernet. WiFi is only for convenience for me, so I'm still using pretty old Netgear R6300v2 with 3rd party firmware.

Can't really recommend newer routers, just go with 6E routers with good reviews on Amazon with your budget.

 

[lantis3]

Found this.

https://www.reddit.com/r/discordapp/comments/1fzqsrg/how_to_make_the_browser_version_of_discord_work/

I wonder if your dlink is filtering some udp traffic. Turn off all filtering feature if there is any.

And have you turn off AI Wi-Fi Optimizer feature mentioned in post #39?

 

[StrawberryCookie]

Found this.

https://www.reddit.com/r/discordapp/comments/1fzqsrg/how_to_make_the_browser_version_of_discord_work/

I wonder if your dlink is filtering some udp traffic. Turn off all filtering feature if there is any.

And have you turn off AI Wi-Fi Optimizer feature mentioned in post #39?

I can't really pin it on d-link router or the AI exactly, because it was still bugging like this when we just had the previous router spectrum gave us... do you think changing the modem would do anything? We're still using the modem they gave us

 

[Ralston18]

@StrawberryCookie

Changing the modem may or may not help.

What would help is some sense of the bigger network "picture".

Here is a generic line diagram that is applicable to most home networks.

Connection path being the following line diagram where ----> represents an Ethernet cable and ~~~~> wireless connection.

ISP === (coax, DSL, fiber) ===> Modem ---->[WAN Port] Router [LAN Port] ----> [LAN Port] Office Wifi Access Point ~~~~> Wireless network devices

With other Router LAN ports -----> Other wired network devices: Computers, Access Points, Printers, NAS, Switches, TVs, etc..

The line diagram can be copied, pasted, and edited into your next post.

Feel to edit and correct as necessary so that the line diagram shows all of the devices and connections in your network. Add, delete, identify,etc.. Number the ports to match existing connections.

Expand the line diagram to include device make and model information.

Do pay close attention to device ports: WAN, LAN. Take your time, no need to rush through it. If unsure just do the best you can and post the applicable question or concern(s).

 

[lantis3]

Make sure there is no port forwarding and UPNP is turned on.

Modem really doesn't matter.

 

[StrawberryCookie]

@StrawberryCookie

Changing the modem may or may not help.

What would help is some sense of the bigger network "picture".

Here is a generic line diagram that is applicable to most home networks.

Connection path being the following line diagram where ----> represents an Ethernet cable and ~~~~> wireless connection.

ISP === (coax, DSL, fiber) ===> Modem ---->[WAN Port] Router [LAN Port] ----> [LAN Port] Office Wifi Access Point ~~~~> Wireless network devices

With other Router LAN ports -----> Other wired network devices: Computers, Access Points, Printers, NAS, Switches, TVs, etc..

The line diagram can be copied, pasted, and edited into your next post.

Feel to edit and correct as necessary so that the line diagram shows all of the devices and connections in your network. Add, delete, identify,etc.. Number the ports to match existing connections.

Expand the line diagram to include device make and model information.

Do pay close attention to device ports: WAN, LAN. Take your time, no need to rush through it. If unsure just do the best you can and post the applicable question or concern(s).

ISP === Spectrum (fiber) ===> Modem ----> SONUV1N [WAN Port] Router D-Link Eagle Pro AI AX3200 Smart Router R32 [LAN Port] ----> [LAN Port] Ethernet --> Windows 11(works)


ISP === Spectrum (fiber) ===> Modem ----> SONUV1N [WAN Port] Router D-Link Eagle Pro AI AX3200 Smart Router R32 [LAN Port] ----> WiFi Access Point --- IPad (this also works)


ISP === Spectrum (fiber) ===> Modem ----> SONUV1N [WAN Port] Router D-Link Eagle Pro AI AX3200 Smart Router R32 [LAN Port] ----> WiFi Access Point --- Samsung S9 fe + Other android devices (Doesn't work with Discord calling )


ISP === Tracfone hotspot WiFi Access Point ---- Samsung Tablet S9 fe (works )

I'm not sure if this is the entirely correct formatting but my stepdad sat down and helped me.. ahhh

 

[StrawberryCookie]

Make sure there is no port forwarding and UPNP is turned on.

Modem really doesn't matter.

I got rid of my (failed attempted) port forwarding setups and UPNP has been enabled