running DDR40 at 333 GA7N400 Pro

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Hello everyone.
Just got myself 2x512mb DDR400 even though my processor runs at333. My
problem is that when using these my system is highly unstable. I would
imagine that it would just underclock to run at 333.

Does anyone have any suggestions or should I assume that at least one of
them is faulty?

I am using GA7N400 Pro with Athlon 2600.

Thanks in advance.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

"imnotawomble" <nospamplease:la006h7356@blueyonder.co.uk> wrote in message
news:JfpQc.53802$a8.36303@fe2.news.blueyonder.co.uk...
> Hello everyone.
> Just got myself 2x512mb DDR400 even though my processor runs at333. My
> problem is that when using these my system is highly unstable. I would
> imagine that it would just underclock to run at 333.
>
> Does anyone have any suggestions or should I assume that at least one of
> them is faulty?
>
> I am using GA7N400 Pro with Athlon 2600.
>
> Thanks in advance.
>
>

I've got 2x512Mb DDR400 running in my 7N400Pro2 board with Athlon XP2800 and
no problems ... if the only thing you've changed is your memory and your
system was stable before that then I'd guess it's the ram at fault.

Mal

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?)

Thanks for the info. One of them was bad.

"Mal" <mincer2000@hotmail.com> wrote in message
news:4112264e$0$2922$cc9e4d1f@news-text.dial.pipex.com...
>
> "imnotawomble" <nospamplease:la006h7356@blueyonder.co.uk> wrote in message
> news:JfpQc.53802$a8.36303@fe2.news.blueyonder.co.uk...
> > Hello everyone.
> > Just got myself 2x512mb DDR400 even though my processor runs at333. My
> > problem is that when using these my system is highly unstable. I would
> > imagine that it would just underclock to run at 333.
> >
> > Does anyone have any suggestions or should I assume that at least one of
> > them is faulty?
> >
> > I am using GA7N400 Pro with Athlon 2600.
> >
> > Thanks in advance.
> >
> >
>
> I've got 2x512Mb DDR400 running in my 7N400Pro2 board with Athlon XP2800
and
> no problems ... if the only thing you've changed is your memory and your
> system was stable before that then I'd guess it's the ram at fault.
>
> Mal
>
>