Hey, so I just bought a Corsair Vengeance PRO RGB 3600 CL 18 16GB(8x2) ram kit to match the one that's already installed into my system.
I ran into a few problems when running all 4 DIMMS, like the PC freezing and not responding at all.
I managed to stabilize and run my system by going into the BIOS and setting everything to Auto (but I noticed that the ram frequency now shows as 2666) I was wondering if I could get any help or suggestions with the timings/voltages so I can get the ram to run at 3600mhz.
I have a ASUS TUF Gaming B550-PLUS (WiFi)
4 Corsair Vengeance Pro RGB 3600 CL 18 (each stick is 8gb)
I ran into a few problems when running all 4 DIMMS, like the PC freezing and not responding at all.
I managed to stabilize and run my system by going into the BIOS and setting everything to Auto (but I noticed that the ram frequency now shows as 2666) I was wondering if I could get any help or suggestions with the timings/voltages so I can get the ram to run at 3600mhz.
I have a ASUS TUF Gaming B550-PLUS (WiFi)
4 Corsair Vengeance Pro RGB 3600 CL 18 (each stick is 8gb)