ryzen 2700 Overclocking cant pass 3,8ghz

Feb 11, 2019
4
0
10
0
Greetings! I just got built my new system and tried to overclock my ryzen 2700 (non X variant). Overcloking were done in Ryzen Master and i managed to get it ti 3.8 ghz at 1.3v. But in cinabench 15 my tems went all up to 94.7. I guess that's not normal at all, as far as for cooling solution i got Deepcool AIO Castle RGB 240. When i try to set clock at 3.9 and do stresstest run in Ryzen Master it's doing just fine, but when i run Cinabench tems go over 95 degrees and system shuts down. I'm just an amature and never done OC before. So kindly asking for help, what am i doing wrong?


System:
CPU: Ryzen 7 2700 3.2
MB: ASRock Gaming K4 Fatality
RAM: Gskill Trident z ddr4 3200mhz 16gb (F4-3200C16D-16GTZR)
GPU: Gygabyte RTX 2070 Gaming 8G
SSD: WD Blue 250GB M.2 SATA
AIO: Deepcool Castle 240RGB
 

Phazoner

Reputable
Jul 2, 2014
537
10
5,115
43
94.7ºC is definitely not right and you really shouldn't have keep pushing the overclock knowing this temps as you can ruin then processor. Repaste, maybe the cooler wasn't properly sit, anad also check the fans speeds. 80ºC are already high temps.
 
Feb 11, 2019
4
0
10
0


i'll try, thanks! Got same idea. Bout what bothers me that when idle its doing around 30 C, so like if fans are not doing right or paste applied not properly it should show a considerably high idle temps, shouldn't it?
 
Feb 11, 2019
4
0
10
0


fans are spinning but i cannot remember what mode i set them on. CPU block is solid i cant wiggle it at all. Speaking of pump i guess it's pumping. It doing some noises, i cant really tell. Never had an AIO before.
 
Feb 11, 2019
4
0
10
0


idling temps stays around 30 C. I had my pc running for like 30 mins than i checked temps and it were around 30c. I hit high temps only when i run Cinnabench.
 

Phazoner

Reputable
Jul 2, 2014
537
10
5,115
43
Idle temps are not really representative as who knows what your fan speeds at idle are and in an AIO the water is continuously flowing. Don't take that as a reference.
 

Similar threads