Hello all.I bought some used Ryzen 7 1800x paired with asus rog strix b450-f, my gpu is r9 290x msi, and psu is corsair cs650m, ram is PANRAM 2x8gb 2400MHz and the ssd is apacer 240gb.
I tried this processor on asus a320m-k mobo and the results is same as b450-f.I was convinced it was down to faulty motherboard but I bought new mobo and results of post is similar to a320m-k.
Since I used this unknown ram I decide to try with 1x16gb gskill aegis 3000mhz but result is same(tried on a320m-k)
While I switch to boot from usb and it started loading(few loading circles and it restart again and again)
Sometimes its proceed to installation menu and goes to 30-40% and show some errors about windows installation media..
What you think, should I oc ram and processor to set higher voltage, maybe windows environment set undervoltage ram or cpu and it stuck to loading screen of Windows?
I tried this processor on asus a320m-k mobo and the results is same as b450-f.I was convinced it was down to faulty motherboard but I bought new mobo and results of post is similar to a320m-k.
Since I used this unknown ram I decide to try with 1x16gb gskill aegis 3000mhz but result is same(tried on a320m-k)
While I switch to boot from usb and it started loading(few loading circles and it restart again and again)
Sometimes its proceed to installation menu and goes to 30-40% and show some errors about windows installation media..
What you think, should I oc ram and processor to set higher voltage, maybe windows environment set undervoltage ram or cpu and it stuck to loading screen of Windows?