Question Samsung 990 Pro -40% random read/write 1 year later

[Z0FT]

I'm just wondering if I should be concerned with the 990 Pro 2TB random read/write performance being slow 1 year later, these are the benchmarks:

1/10/24
------
Sequential Read: 7378
Sequential Write: 6740
Random Read: 1397705
Random Write: 1014160

12/1/24
-------
Sequential Read: 7420
Sequential Write: 6874
Random Read: 846923
Random Write: 529785

Temps are fine maxing out at around 47* C. The drive is also half full at 1.02 TB, compared to prolly only 100gb or so when I ran the test back in January. Should I be concerned, or is this normal with having more data stored?

(Diagnostic scan came back 100% fine btw, using firmware 4B2QJXD7)

 

[CountMike]

I'm just wondering if I should be concerned with the 990 Pro 2TB random read/write performance being slow 1 year later, these are the benchmarks:

1/10/24
------
Sequential Read: 7378
Sequential Write: 6740
Random Read: 1397705
Random Write: 1014160

12/1/24
-------
Sequential Read: 7420
Sequential Write: 6874
Random Read: 846923
Random Write: 529785

Temps are fine maxing out at around 47* C. The drive is also half full at 1.02 TB, compared to prolly only 100gb or so when I ran the test back in January. Should I be concerned, or is this normal with having more data stored?

(Diagnostic scan came back 100% fine btw, using firmware 4B2QJXD7)

Nothing to worry about, most probably due to windows, in reality they don't use that much speed anyway.

 

[Z0FT]

Nothing to worry about, most probably due to windows, in reality they don't use that much speed anyway.

so essentially, is windows 11 hindering its ability rather than the performance of the ssd itself?

 

[Bob.B]

I'm just wondering if I should be concerned with the 990 Pro 2TB random read/write performance being slow 1 year later, these are the benchmarks:

1/10/24
------
Sequential Read: 7378
Sequential Write: 6740
Random Read: 1397705
Random Write: 1014160

12/1/24
-------
Sequential Read: 7420
Sequential Write: 6874
Random Read: 846923
Random Write: 529785

Temps are fine maxing out at around 47* C. The drive is also half full at 1.02 TB, compared to prolly only 100gb or so when I ran the test back in January. Should I be concerned, or is this normal with having more data stored?

(Diagnostic scan came back 100% fine btw, using firmware 4B2QJXD7)

Is trim enabled?

Is the optimize app set up proper and running?

 

[Z0FT]

Is trim enabled?

Is the optimize app set up proper and running?

I believe trim is enabled by default

I have not messed with the app at all, performance was set to “standard”.