Samsung SSD 850 PRO booting problem.

[DrFrankensteinx]

Hello friends, I am having a little trouble installing my new ssd. I am no computer expert so I ask to not be made fun of if this could have been fixed with a single mouse click.

Step by step starts by me connecting sata cable and psu cable to ssd, after restarting I installed the Samsung data migration tool. I then get a access violation error. Tried reinstalling it and still got the error.

http://imgur.com/A41zKMc

I left it as it was for a couple of days because I didn't have any time to fix it up. So today I had some time to spare to I tried doing it again. Still got access violation. So I went to disk management and created new simple volume for the ssd on default settings (did not know had to do this). Still got the error. I later found a solution in forum, telling me to move ssm.dll file, opening the program and pasting it back again. So I did and it worked fine, no errors. Finished migration with no problem (see both drivers):

http://imgur.com/2iT2rZa (hdd)

http://imgur.com/Cnn7aoc (ssd)

As soon as it finished migration, I shut down the computer, but it took about 15 minutes and finally I got a blue screen of death.

http://imgur.com/Q6fuiyB (bsod report after changing back the drivers)

Pc then shuts down and so I went on bios to change boot driver priority, set to ssd and restarted pc.

Got this error:

http://imgur.com/9A6Qvmh

Changed back to previous hdd and it worked fine. This is a disk scan after the bloodbath:

http://imgur.com/NcLRD26

Hopefully I provided enough info for the problem to be found. And just in case, here are my pc specs:

http://imgur.com/VeLXEUY

 

[mad-max79]

Did you scan your HDD before cloning?

 

[CompGee]

I think you need to rebuild your Boot Configuration Data store(BCD). You can find instructions from Microsoft here:

https://support.microsoft.com/en-us/kb/927392

Follow the instructions under /RebuildBcd.