Hi, guys!! Hope you're all good!
Today i was OCing my memories, but after setting the memory boost and the voltage, the PC didnt turn on.
So, i needed to reset The CMOS through the jumper. For that, i would have to take off my GPU, but the plastic switch was too stiff, and then i take a Screwdriver. But i was careless, and it slipped from my hand, resulting in this scratch:
https://drive.google.com/file/d/1Fl7B26YOk2Z543ycvDfZErha-4EQcOee/view?usp=drivesdk
So, i reseted CMOS, turn on the PC, and everything is working fine. Am i good, or should i be worried?
Thank you all!
Big hug from Brazil!
Today i was OCing my memories, but after setting the memory boost and the voltage, the PC didnt turn on.
So, i needed to reset The CMOS through the jumper. For that, i would have to take off my GPU, but the plastic switch was too stiff, and then i take a Screwdriver. But i was careless, and it slipped from my hand, resulting in this scratch:
https://drive.google.com/file/d/1Fl7B26YOk2Z543ycvDfZErha-4EQcOee/view?usp=drivesdk
Arranhão3.jpg
drive.google.com
Thank you all!
Big hug from Brazil!
Last edited: