Question Seasonic FOCUS GX-750 - is a 24-pin to 8-pin adapter needed to install in Dell Precision T3620 + adapter recommendations?

[hbenthow]

I bought a Seasonic FOCUS GX-750 power supply, which arrived today. I bought it to install it in my Dell Precision T3620.

As the PSU is fully modular, I assumed that it would come with both 24-pin and 8-pin motherboard connectors and thus not need the typical 24-pin to 8-pin adapters that most PSUs need to be installed in a Dell Precision. However, that seems not to be the case. There are some 8-pin connections on the PSU, but it appears that they may not be compatible with the motherboard, since they are not labeled as such.

Will I indeed need an adapter? And if so, is this a good one?

https://www.amazon.com/AsLiL-24-Pin-Supply-Adapter-Motherboards/dp/B0CKZHLCDF/

If it's not a good/reliable one, can you recommend any that are?

 

[Lutfij]

Yes the board has proprietary connectors.

You should get this;
https://www.ebay.com/itm/385263136845
and call it a day.

Further reading;
https://www.dell.com/community/en/c...ter-for-atx-standard/647f7c51f4ccf8a8deaa5b41

 

[hbenthow]

You should get this;
https://www.ebay.com/itm/385263136845
and call it a day.

Thank you.

 

[LuKaWin10]

Yes the board has proprietary connectors.

You should get this;
https://www.ebay.com/itm/385263136845
and call it a day.

Further reading;
https://www.dell.com/community/en/c...ter-for-atx-standard/647f7c51f4ccf8a8deaa5b41

Could you also solder an atx 24 pin slot lol? Asking just to know, bcz i see where the atx slot is some dots maybe you can?

 

[Lutfij]

If your hardware is expendable and your workmanship with soldering is good, go for it...if the motherboard get's ruined you can blame yourself for it. Personally, I wouldn't tinker with that motherboard electrically.

 

[LuKaWin10]

If your hardware is expendable and your workmanship with soldering is good, go for it...if the motherboard get's ruined you can blame yourself for it. Personally, I wouldn't tinker with that motherboard electrically.

Lol, I would not too hahha. I only asked this out of curiosity because I saw it reminded me of the ATX 24 pin but without the slot. But you really need lots of skill in soldering and pretty much need to be precise. And I agree with you!