Server Boot issue

VNRVJIET

Prominent
Feb 21, 2017
1
0
510
Boot failed - sata port 0: CD/DVD - sSata port 0 pciRoot (0X0)/ pci(0X11, 0x4)/sata (0X0, 0X0,0X0)

Unable to Boot Linux Cd when put in Lenovo X3650 Server.

Kindly help in booting the CD and installing the software. Thanks in advance.
 
Solution


VNRVJIET,

I am far from an expert in this, but based on the error message you might try:

1. UEFI ON
2. Secure Boot OFF
3. Enable Legacy ROM ON

This may then show the CD/DVD drive as MBR and readable for the installation.

Or, if you can mount Linux on a flash drive and change the boot order to USB, the system may be more sympathetic.

I hope others will comment as well.

Cheers,

BambiBoom


VNRVJIET,

I am far from an expert in this, but based on the error message you might try:

1. UEFI ON
2. Secure Boot OFF
3. Enable Legacy ROM ON

This may then show the CD/DVD drive as MBR and readable for the installation.

Or, if you can mount Linux on a flash drive and change the boot order to USB, the system may be more sympathetic.

I hope others will comment as well.

Cheers,

BambiBoom
 
Solution