SFF low profile pc graphics card upgrade help

NClemance

Reputable
Mar 10, 2014
47
0
4,530
I need to upgrade my Small Form Factor Computer's
graphics card.
OriginalPng

(its the smallest one)
and here is what I had in mind:
http://
the vga port comes off and a low profile bracket goes on (I plan to use HDMI)
I'm not sure if It would fit inside my case in the PCEx16 slot
Main Question:
Will this work with my motherboard and will it fit in the bracket slot?
Because my motherboard may be outdated to work with it or something.
or it might make the cpu out of sync with graphics or something annoying like that.

Need more information?
http://
heres dxdiag:
http://
feel free to ask for more info on something an thanks for your help if you do so.
 
Solution
Short answer for you, yes. Everything will work fine if you put that GPU in there, but there are better options out there if you have the budget for it, or just tell me and I can find one.

thanks for your great suggestions but I Cant really buy online because I live in New Zealand so shipping is not available.
If you think that was overpriced you should see how much it costs in the NZ shop I'm getting it from:
http://
thanks for your help!

 

yes I measured the interior with a ruler
available space (from inside): 17cm long 6cm wide and 5cm high.
The graphics card is 7 " x 4.76 " Inch which is 17.78cm x 12.0904cm and I think this is its width measurements with the big bracket on and a low profile bracket is 7.9cm wide and fits on the case.
the card looks like it has a massive heat sink (width problem maybe) and I cant find any other measurements for it beside the one above, I need depth and card width(not bracket).
my pc is the dell optiplex 980 Small Form Factor (smallest one possible).
go to page 7 in this document:
http://sites.fas.harvard.edu/~phys191r/Bench_Notes/optiplex-980-tech-guide.pdf
General Spec
Brand
DELL
Series
OptiPlex
Model
980 (468-9824)
Type
Business Desktops & Workstations
Form Factor
Slim/Small form factor

Power Supply
235W
Operating System
Windows 7 Professional 64-bit
Expansion
External Bays
1 external 3.5" (slimline)
1 external 5.25" (slimline)
Internal Bays
2 internal 3.5"
PCI Slots (Available/Total)
1 low-profile PCIe x16
1 low-profile PCI

Physical Spec
Dimensions
12.87" x 3.46" x 11.81"
Weight
13.0 lbs
 
EVGA GT610 will fit http://www.pbtech.co.nz/index.php?z=p&p=VGAEVG2615&qr=pspy

OK, so let's talk about dimensions.
We're clear that the PCI lot width is good to go, because low-profile bracket is a standard and this GT610 supports low-profile.
The length or depth of this card is literally the length of the PCI-E x16 lane slot, measured by the picture that the card does not extend longer than the golden connector on the bottom, which is the PCI-E slot.
The height of the card is no problem either, the card will face downward, oppose from the silver battery. Therefore, the height will extend into blank spaces, unless you have another PCI card installed already.

Does it make sense?
 

yes, thanks, I think the GT610 will be fine but I want to know if the 210 will fit
 
are the specs good for playing / recording Minecraft? because I can already with the Radeon HD 3400 (with low graphics settings though that's why I plan to upgrade and Its unfortunate that I have a SFF)