Question Should i enable/disable any of these bios settings to increase stability during CPU overclocking? also which power plan is optimum for same reason?

[eziowar]

Hi, my cpu i5-4670k,cpu cooler-Hyper 212X , gpu - Asrock rx 7800xt challenger oc, mobo- gigabyte z87x-ud3h, bios version F10b, psu corsair cs650m, corsair ram 4x4gb @1600 mhz dual channel, Crucia MX 500 500gb ssd,windows10.
Should i enable/disable any of these bios settings to increase stability during CPU overclocking?

https://imgur.com/JKE3xed

View: https://i.imgur.com/JKE3xed.png

also which power plan is optimum for same reason?

https://imgur.com/Pw3ppw6

View: https://i.imgur.com/Pw3ppw6.png

 

[Fix_that_Glitch]

If you are trying to get get every bit of performance from your cpu use the high-performance setting in Windows. As far as bios settings the ones I would change would be to turn off C1E, C3, C6/7 these are power saving setting. Also turn off Eist it changes your cpu voltage and core frequency if you leave it on.

 

[hotaru.hino]

Leave it all on defaults and only touch the multiplier and voltage to see how far you can get first. Then see if you're satisfied or not with the end result.

 

[eziowar]

Leave it all on defaults and only touch the multiplier and voltage to see how far you can get first. Then see if you're satisfied or not with the end result.

in that way i'm getting very poor overclocking, thats why i wanna change c states

 

[hotaru.hino]

in that way i'm getting very poor overclocking, thats why i wanna change c states

What is the multiplier and voltage you're ending up with?

Keep in mind your chip could also not be that overclockable.

 

[eziowar]

What is the multiplier and voltage you're ending up with?

Keep in mind your chip could also not be that overclockable.

4.1 ghz at 1.2v is failling at 30m of aida64

 

[hotaru.hino]

4.1 ghz at 1.2v is failling at 30m of aida64

You need more voltage.

Also you already have a topic about this: https://forums.tomshardware.com/threads/help-with-overclocking-my-cpu.3827811/

 

[Fix_that_Glitch]

You need more voltage.

Also you already have a topic about this: https://forums.tomshardware.com/threads/help-with-overclocking-my-cpu.3827811/

I would try 1.275 that should get you to 4.1 with decent cooling.

 

[lolvatveo]

If you are trying to get get every bit of performance from your cpu use the high-performance setting in Windows. As far as bios settings the ones I would change would be to turn off C1E, C3, C6/7 these are power saving setting. Also turn off Eist it changes your cpu voltage and core frequency if you leave it on.

bad advice, the cpu will always at max clock and voltage, VOLTAGE. This isn't good, it need a rest and run at max when need. All these setting is for cpu efficent if you overclock or not. it auto boost to max clock on demand

 

[Fix_that_Glitch]

bad advice, the cpu will always at max clock and voltage, VOLTAGE. This isn't good, it need a rest and run at max when need. All these setting is for cpu efficent if you overclock or not

If you comprehend what I wrote, "IF" you are trying to get get every bit of performance from your cpu " I run my 10850k at 5.0 with no ill effects.