[SOLVED] [SOLVED] Cannot sync ARGB from my case

Status
Not open for further replies.
Feb 1, 2021
9
1
25
1
Hello

I've got a Be Quiet 500 DX case which includes a LED stripe at the front. Plugged it into SATA and motherboard = working correctly.

But I can't sync it with RGB Fusion.

The LED from the case is supposed to be ARGB. I have a connector with 3 holes. So I plugged it into D_LED1 onto the motherboard. I can't plug it into LED_C1 because that later one has 4 pins.

So what's wrong ?
 
Feb 1, 2021
9
1
25
1
Solved !

I've got the answer on another board: Just hold the RGB button on the case for 3 seconds and then it will enable motherboard control.
 
Feb 1, 2021
9
1
25
1
Solved !

I've got the answer on another board: Just hold the RGB button on the case for 3 seconds and then it will enable motherboard control.
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
S Cases 2

ASK THE COMMUNITY

TRENDING THREADS