Hey i would say im pretty new with pc building only built 2 pcs ever!
And i wanted to treat myself to a top line pc build but trying to keep in a smaller pc then mid tower or larger case so it dont lack any of the good power & good looks!
but have it in a small build specially compared to my other build.
I would like help with everything basically have a second pair eyes of experinced builders on my build to see if everything is
right and compatible with eachother as i dont want to get something wrong as this is a very expensive build.
My Build -> PCPARTPICKER
I'm going for a full RGB Build and full overkill pc build!
I'm gonna be puting AIO sucking air in from the top.
Changing Fans of AIO to 2x "Fractal Design Aspect 12 RGB PWM 56 CFM 120mm"
I'm unsure would i run into any issues with adding different brand RGB fans?
-Does the Motherboard require a bios update as PCPARTPICKER says, This motherboard would come
with it now? Or will i need to get something else to get the bios updated like different cheaper cpu to get it working to update it?
-The AIO & GSkill Ram Clearance is SUPER close i think i saw its around 44-45mm and on the case it says has to be with top mounted radiator its (Up to 46mm RAM height)
would that be completly fine?
-Case & GPU Clearance is also close GPU at 357.6mm and case is 365 this would be fine? would it hurt the gpu being temps like that?
Also would the GPU be to close to the bottom hurt it lots?
-AIO NXZT Kraken Z53 comes with the LGA1700 mounting adapter? I think i saw somewhere where they now include them now?
-Is a 80+ Plat PSU 1000W enough should i go higher or staying at that watts fine?
-With cooling would everything run fine? or will be it too hot for this certain case?
-the GPU will probably sag and could i do anything to stop it or help it? Maybe a mount i could use near the end of the case to help.
-Will GPU fit probably? Will the fans actually breath?
-Will AIO Cooler fit on the top comeplelty fine with the new fans? I'm worried that it wont fit and because of ram or other parts.
-Will I need a full RGB Controller? if so whats good recommendations for my build?
(First time doing proper RGB in a PC Build so don't have a clue really)
-Did i pick the right cables from CableMod for my PSU?
(Gonna be the first time trying different cables in a build)
-Will the ram be fine getting 32GB (2x16GB) and then get another for 64GB in total?
Thank you any infomation will help me! (I won't be overclocking)
And i wanted to treat myself to a top line pc build but trying to keep in a smaller pc then mid tower or larger case so it dont lack any of the good power & good looks!
but have it in a small build specially compared to my other build.
I would like help with everything basically have a second pair eyes of experinced builders on my build to see if everything is
right and compatible with eachother as i dont want to get something wrong as this is a very expensive build.
My Build -> PCPARTPICKER
I'm going for a full RGB Build and full overkill pc build!
I'm gonna be puting AIO sucking air in from the top.
Changing Fans of AIO to 2x "Fractal Design Aspect 12 RGB PWM 56 CFM 120mm"
I'm unsure would i run into any issues with adding different brand RGB fans?
-Does the Motherboard require a bios update as PCPARTPICKER says, This motherboard would come
with it now? Or will i need to get something else to get the bios updated like different cheaper cpu to get it working to update it?
-The AIO & GSkill Ram Clearance is SUPER close i think i saw its around 44-45mm and on the case it says has to be with top mounted radiator its (Up to 46mm RAM height)
would that be completly fine?
-Case & GPU Clearance is also close GPU at 357.6mm and case is 365 this would be fine? would it hurt the gpu being temps like that?
Also would the GPU be to close to the bottom hurt it lots?
-AIO NXZT Kraken Z53 comes with the LGA1700 mounting adapter? I think i saw somewhere where they now include them now?
-Is a 80+ Plat PSU 1000W enough should i go higher or staying at that watts fine?
-With cooling would everything run fine? or will be it too hot for this certain case?
-the GPU will probably sag and could i do anything to stop it or help it? Maybe a mount i could use near the end of the case to help.
-Will GPU fit probably? Will the fans actually breath?
-Will AIO Cooler fit on the top comeplelty fine with the new fans? I'm worried that it wont fit and because of ram or other parts.
-Will I need a full RGB Controller? if so whats good recommendations for my build?
(First time doing proper RGB in a PC Build so don't have a clue really)
-Did i pick the right cables from CableMod for my PSU?
(Gonna be the first time trying different cables in a build)
-Will the ram be fine getting 32GB (2x16GB) and then get another for 64GB in total?
Thank you any infomation will help me! (I won't be overclocking)